Spritzkännchen-variationen
Moderator: Mods
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Spritzkännchen-variationen
In this Topic we can shear our experiences and photos of the Spritz-kännchen.
T.m.o. there were there basically 3 variations.
Type 1 brass plate 80 x 50 x 21 mm. soldered
Type 2 from sheet iron 80 x 50 x 21 mm. soldered
Type 3 of sheet iron 80 x 45 x 21 mm. rock seam
Until 1943 the cans were fixed in leather holder on the front fork. From 1943 in Iron-holder under the driver saddle. There were 2 variations Iron-holders for 50 and 45mm wide can.
T.m.o. the DKW NZ has used only cans with inscription 'Krafftstoff' and without endorsement ads. Cans with the word 'Oil' and 'Petroleum' were used for other purposes.
Greeting,
Martin
In diesen Topic könnt ihr Erfahrungen und Bilder von die Spritzkännchen auswechseln.
N.m.m. Gab es grundsätzlich 3 Variationen.
Typ 1 aus Messingblech 80 x 50 x 21 mm. gelötet
Typ 2 aus Eisenblech 80 x 50 x 21 mm. gelötet
Typ 3 aus Eisenblech 80 x 45 x 21 mm. Felsnaht
Bis 1943 waren die Kännchen in Lederhalter an die Vordergabel befestigt. Ab 1943 in Eisenhalter unter das Fahrersattel. Es gab 2 Variationen Eisenhalter für die 50 und 45mm breite Kännchen.
N.m.m. hat die DKW NZ nur Kännchen mit Aufschrift 'Krafftstoff' und ohne Aufschrift gebraucht. Kännchen mit Aufschrift 'Oel' und 'Petroleum' wurden für ander Zwecke gebraucht.
Gruss,
Martin
T.m.o. there were there basically 3 variations.
Type 1 brass plate 80 x 50 x 21 mm. soldered
Type 2 from sheet iron 80 x 50 x 21 mm. soldered
Type 3 of sheet iron 80 x 45 x 21 mm. rock seam
Until 1943 the cans were fixed in leather holder on the front fork. From 1943 in Iron-holder under the driver saddle. There were 2 variations Iron-holders for 50 and 45mm wide can.
T.m.o. the DKW NZ has used only cans with inscription 'Krafftstoff' and without endorsement ads. Cans with the word 'Oil' and 'Petroleum' were used for other purposes.
Greeting,
Martin
In diesen Topic könnt ihr Erfahrungen und Bilder von die Spritzkännchen auswechseln.
N.m.m. Gab es grundsätzlich 3 Variationen.
Typ 1 aus Messingblech 80 x 50 x 21 mm. gelötet
Typ 2 aus Eisenblech 80 x 50 x 21 mm. gelötet
Typ 3 aus Eisenblech 80 x 45 x 21 mm. Felsnaht
Bis 1943 waren die Kännchen in Lederhalter an die Vordergabel befestigt. Ab 1943 in Eisenhalter unter das Fahrersattel. Es gab 2 Variationen Eisenhalter für die 50 und 45mm breite Kännchen.
N.m.m. hat die DKW NZ nur Kännchen mit Aufschrift 'Krafftstoff' und ohne Aufschrift gebraucht. Kännchen mit Aufschrift 'Oel' und 'Petroleum' wurden für ander Zwecke gebraucht.
Gruss,
Martin
Last edited by martdapp on Tue Aug 09, 2016 10:43 pm, edited 8 times in total.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 3 mit Oel-aufschrift in Repro- Eisenhalter
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 1 mit Aufschrift Kraftstoff
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 1 ohne Aufschrift
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 2 Repro-kännchen in repro-Halter von Oldtimer Garage
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 2 ungebraucht
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 3 mit Oel-aufschrift
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 3 mit 1945 lackierung
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Lederhalter aus ETL 605
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 2 in Original Halter
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 2 ohne Aufschrift
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typen 1 - 3 und 2
Typ 3 mit Oel-aufschrift
Typ 3 mit Oel-aufschrift
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 2 LW-Ausführung in org. Halter NOS
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 3 in Leder Halter
You do not have the required permissions to view the files attached to this post.
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Spritzkännchen-variationen
Typ 1 lackiert
You do not have the required permissions to view the files attached to this post.
Last edited by martdapp on Tue Aug 09, 2016 8:06 pm, edited 2 times in total.