Hello,
Where to buy new or nos korkscheiben??
Can't find theme at geyer's site, I need a new set of them since the one's
that are inside now are quit worn out.
Greetings, Dirk
korkscheiben
Moderator: Mods
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: korkscheiben
For wich type NZ Dirk,
250-350/38-43 or NZ-1?
250-350/38-43 or NZ-1?
Re: korkscheiben
Hi Martin,
It's for the nz 350, but yesterday I found them at greiner's by the name kuplungslammele and not korkscheiben, only to find out that they cost 41,60e a piece!
That mean's 160e since I need 4 for my nz 350.
A single piece of kork cost's 0,70e, you need 96 of them so just replacing the kork
cosst just 67e!
Anyone who has done that before?
Greetings Dirk
It's for the nz 350, but yesterday I found them at greiner's by the name kuplungslammele and not korkscheiben, only to find out that they cost 41,60e a piece!
That mean's 160e since I need 4 for my nz 350.
A single piece of kork cost's 0,70e, you need 96 of them so just replacing the kork
cosst just 67e!
Anyone who has done that before?
Greetings Dirk
Re: korkscheiben
Hello Dirk,
Yes, I have change all the korks one time. It's a long time to pass but it's possible. When you have put all the korks, you have to equalize to have the same thickness everywhere. I made the equalize on turn machine.
Regards,
Lolo.
Yes, I have change all the korks one time. It's a long time to pass but it's possible. When you have put all the korks, you have to equalize to have the same thickness everywhere. I made the equalize on turn machine.
Regards,
Lolo.
Hello,
I'have à 125 RT of 1944 and a 350 NZ-1.
I'have à 125 RT of 1944 and a 350 NZ-1.
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: korkscheiben
Dirk,
if you glue some sandpaper to a piece of glass (old mirror i.e) you should be able to bring the cork pieces all to the same height.
Regards
Thomas
if you glue some sandpaper to a piece of glass (old mirror i.e) you should be able to bring the cork pieces all to the same height.
Regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: korkscheiben
Hello Lolo and Thomas,
Thank you for your reply's and the usefull info!
Greetings Dirk
Thank you for your reply's and the usefull info!
Greetings Dirk