Part No. 124823-1

Here you can post your want adds for NZ 350, 350-1 parts

Moderator: Mods

Post Reply
ztitus713
Tool Cleaner
Tool Cleaner
Posts: 53
Joined: Sat Aug 27, 2011 4:36 am

Part No. 124823-1

Post by ztitus713 » Wed Apr 18, 2012 3:07 am

I need part number 124823-1 from parts list Nr. 58. It is the brake mechanism/lever that attaches to the brake on the front tire.

Zack
TM250
Tool Cleaner
Tool Cleaner
Posts: 56
Joined: Sat Feb 26, 2011 7:25 pm
Location: Norway

Re: Part No. 124823-1

Post by TM250 » Fri Apr 20, 2012 3:46 pm

Hallo!

I have one (1) off P/N 124823-1 for sale.

Regards
ztitus713
Tool Cleaner
Tool Cleaner
Posts: 53
Joined: Sat Aug 27, 2011 4:36 am

Re: Part No. 124823-1

Post by ztitus713 » Fri Apr 20, 2012 10:31 pm

Hello

What is the cost of the part plus shipping to the USA? Thank you

Regards
Zack
ztitus713
Tool Cleaner
Tool Cleaner
Posts: 53
Joined: Sat Aug 27, 2011 4:36 am

Re: Part No. 124823-1

Post by ztitus713 » Fri Apr 20, 2012 11:33 pm

Also do you have a picture that you could send me of the part?

Regards
Zack
TM250
Tool Cleaner
Tool Cleaner
Posts: 56
Joined: Sat Feb 26, 2011 7:25 pm
Location: Norway

Re: Part No. 124823-1

Post by TM250 » Sat Apr 21, 2012 11:51 am

Hello again!

Just want to make sure that you are looking for P/M 124823-1, i.e. the one having a spline attachment with a 7mm bolt fastner. On my own two NZ 350 (1938 and 1940) the corresponding part is P/N 123817-0. This one is attached wirh a nut on a threaded shaft. I guess EUR 20 or eqiuvalent in USD would be a reasonable cost plus shipping. Will try to get a picture taken over the weekend and also check shipping costs.The part is stamped with the number you are asking for. Sometime I find it difficult to upload photographs on the Forum so an e-mail adress may be helpful.
Best regards
ztitus713
Tool Cleaner
Tool Cleaner
Posts: 53
Joined: Sat Aug 27, 2011 4:36 am

Re: Part No. 124823-1

Post by ztitus713 » Sun Apr 22, 2012 1:41 am

Hello

My email address is ztitus713@gmail.com . I will be looking for the picture over the weekend. Thank you for your help.

Zack
Post Reply