NZ 350/1943 parts
Moderator: Mods
NZ 350/1943 parts
Hi,
Found a NZ 350/1943 project and should need some parts:
- Front fender
- Bracket for Hasag 130 headlight
- Engine blocks from late 1943 (Nov or Dec)
- Springs for rear fender rear part (the ones holding the support bracket)
- Hella horn
- Tool box
If you have got some parts for sale, please send a PM.
P.S I have also some NZ250 engines for trading if someone needs.
Found a NZ 350/1943 project and should need some parts:
- Front fender
- Bracket for Hasag 130 headlight
- Engine blocks from late 1943 (Nov or Dec)
- Springs for rear fender rear part (the ones holding the support bracket)
- Hella horn
- Tool box
If you have got some parts for sale, please send a PM.
P.S I have also some NZ250 engines for trading if someone needs.
frontfender
It´s a original new part ! 130 Euro+send
Hi Zylinder,
A very nice fender!!!It will fit on 1938-43 bikes, If I should have known about this fender one year ago when I welded and hammered the one on my 1940 NZ 350, I should have bought it immediately! The bike I am searching parts for is a 350/1943, late year (manufactured in December 1943) and should have the same sleek front fender as the NZ 350-1. Thank you anyway for your offer!
// Frank
A very nice fender!!!It will fit on 1938-43 bikes, If I should have known about this fender one year ago when I welded and hammered the one on my 1940 NZ 350, I should have bought it immediately! The bike I am searching parts for is a 350/1943, late year (manufactured in December 1943) and should have the same sleek front fender as the NZ 350-1. Thank you anyway for your offer!
// Frank
Hi Martin,
Thanks for your offer, but NZ350/1943 shall have the newer model of rear footpegs 122990-1. On the bike there are "fragments" left of an original 122990-1, so I have to make two new according to the original model. Of course, if someone have two original 122990-1 to sale to a normal price, I can buy them.
I have also two of those Blau footpegs, with the smaller thread somewhere, and I remember that they came from a scrapped NZ 250. Its possible to mount them on a NZ 350, but they are not of correct size for the threaded hole in the rear frame.
I remember that in some older parts manual are stated that older NZ 250 and 350 have different Blau footpegs and the NZ 250 have those with the smaller thread, according to my understanding the NZ 350 shall have footpegs with M18X1,5 thread.
What is the thread diameter on those footpegs Martin?
// Frank
Thanks for your offer, but NZ350/1943 shall have the newer model of rear footpegs 122990-1. On the bike there are "fragments" left of an original 122990-1, so I have to make two new according to the original model. Of course, if someone have two original 122990-1 to sale to a normal price, I can buy them.
I have also two of those Blau footpegs, with the smaller thread somewhere, and I remember that they came from a scrapped NZ 250. Its possible to mount them on a NZ 350, but they are not of correct size for the threaded hole in the rear frame.
I remember that in some older parts manual are stated that older NZ 250 and 350 have different Blau footpegs and the NZ 250 have those with the smaller thread, according to my understanding the NZ 350 shall have footpegs with M18X1,5 thread.
What is the thread diameter on those footpegs Martin?
// Frank
Re: NZ 350/1943 parts
Hi,
Still searching for the following parts for my NZ350/1943:
- Hella horn
- Zyklon air cleaner
- Front fender
- Rear part of rear fender
- Slingshot bracket for front light
Only original DKW parts are of interest, not parts from IZH. Can buy the parts or trade them against NZ250/350 parts.
// Frank
Still searching for the following parts for my NZ350/1943:
- Hella horn
- Zyklon air cleaner
- Front fender
- Rear part of rear fender
- Slingshot bracket for front light
Only original DKW parts are of interest, not parts from IZH. Can buy the parts or trade them against NZ250/350 parts.
// Frank
Re: NZ 350/1943 parts
Zyklon air cleaner found, Thank you forum member TM250
Still searching for:
-Front fender
-Slingshot bracket for front light
-Rear part of rear fender, or just all the springs holding/locking the support bracket
-Hella horn
// Frank
Still searching for:
-Front fender
-Slingshot bracket for front light
-Rear part of rear fender, or just all the springs holding/locking the support bracket
-Hella horn
// Frank
Re: NZ 350/1943 parts
Hella horn found.
Parts still needed:
-Front fender
-Fuel tank cap for NZ350/1943 (mit ölmessbecher)
-Slingshot bracket for the front light
-Maybe a fuel tank in good/fair condition (the WH model with the welding seam on the upper surface and without the mountings for tank rubbers), mine own tank is quite bad, both rusty and with a lot of dents. Its possible to fix, but needs a lot of work
// Frank
Parts still needed:
-Front fender
-Fuel tank cap for NZ350/1943 (mit ölmessbecher)
-Slingshot bracket for the front light
-Maybe a fuel tank in good/fair condition (the WH model with the welding seam on the upper surface and without the mountings for tank rubbers), mine own tank is quite bad, both rusty and with a lot of dents. Its possible to fix, but needs a lot of work
// Frank
Re: NZ 350/1943 parts
Front fender found, Thanks to forummember voibrenna!
Fueltank is repaired so its now ok. Parts still missing is:
-Fuel tank cap with cup for oil mixing.
-Metal parts for a Pagusa rear seat.
-Slingshot bracket for the front light.
// Frank
Fueltank is repaired so its now ok. Parts still missing is:
-Fuel tank cap with cup for oil mixing.
-Metal parts for a Pagusa rear seat.
-Slingshot bracket for the front light.
// Frank