Search found 422 matches

by Frank
Sat Mar 06, 2021 10:17 pm
Forum: NZ Talk
Topic: Need help
Replies: 17
Views: 10521

Re: Need help

HI Vadim, In the link it is clearly visible the tractor lamp is totally different, but some sellers take pictures of the tractor lamp from different angles so it is very difficult to spot the difference to a original one and then try to sell it as a NZ lamp. If you want, you can email me pictures of...
by Frank
Thu Mar 04, 2021 6:43 pm
Forum: NZ Talk
Topic: Need help
Replies: 17
Views: 10521

Re: Need help

Hyvää Iltaa Vadim, Yes, thats correct, the same lamp was used on NZ500. The moss green bike on the first pictures is my NZ500. Please also notice that some dishonest sellers on the web sometimes tries to fool NZ owners by selling this agricultural tractor lamp as a NZ lamp https://shop.delegro.nl/DE...
by Frank
Mon Mar 01, 2021 11:16 pm
Forum: NZ Talk
Topic: Need help
Replies: 17
Views: 10521

Re: Need help

Hi again,

Forum member Motorboy13 (Raimond) restored a quite bad dug out NZ350 rear lamp and he got it very nice. Maybe he has some pictures of it?

Best greetings!

//Frank
by Frank
Mon Mar 01, 2021 11:10 pm
Forum: NZ Talk
Topic: Need help
Replies: 17
Views: 10521

Re: Need help

Terve Vadim,

Onnea ja menestystä projektin kanssa!


//Frank
by Frank
Mon Mar 01, 2021 7:14 pm
Forum: NZ Talk
Topic: Primary Chain
Replies: 3
Views: 3368

Re: Primary Chain

Hi Raimond,

Just glad if I can help someone to find good parts to a good price. There are so many "business-men" selling pure crap parts to those bikes :evil:

Best Greetings!

//Frank
by Frank
Mon Mar 01, 2021 7:06 pm
Forum: NZ Talk
Topic: Need help
Replies: 17
Views: 10521

Re: Need help

Hi Vadim, NZ250 and NZ350 (1938-43) hade different tail lamps. NZ250 used the common Hella rear lamp which was very common on many German bikes in the 40´s and 50´s. Those are easy to find both used and repro. http://www.oldtimergarage.eu/catalog/product_info.php?cPath=22_183&products_id=1431 The NZ...
by Frank
Sun Feb 14, 2021 11:34 pm
Forum: NZ Talk
Topic: Project NZ 350 1943
Replies: 2
Views: 3246

Re: Project NZ 350 1943

Hi, Maybe a late answer, but some info comes here: 605915 should be a later half 1942 bike and the factory color grey. i am not sure if the manufacturing year always was stamped at the factory. I had a 1940 NZ350 where the manufacturing year was never stamped on the type plate. If I remember correct...
by Frank
Sun Feb 14, 2021 11:13 pm
Forum: NZ Talk
Topic: Primary Chain
Replies: 3
Views: 3368

Re: Primary Chain

Hi Chris,

Good to hear you fixed the problem =D>

Best greetings from Finland!


//Frank
by Frank
Sun Jun 28, 2020 11:15 pm
Forum: NZ Talk
Topic: Kickstarter repaired!
Replies: 1
Views: 3014

Re: Kickstarter repaired!

Hi Chris,

Good to hear you fixed the kickstarter!

Have a nice summer!


//Frank
by Frank
Sun Jun 28, 2020 11:14 pm
Forum: NZ Talk
Topic: rewinding the coil
Replies: 2
Views: 3118

Re: rewinding the coil

Hi,

Primary 275-280 turns and secondary 9000-9400 turns.


//Frank
by Frank
Sat Mar 07, 2020 7:40 pm
Forum: Everything NZ 250
Topic: NZ 250 bing carb problem?
Replies: 2
Views: 3231

Re: NZ 250 bing carb problem?

Hi, The carb in the link is a post war Bing, very similar to the old AJ, but it should work perfectly on a NZ. The pre war Bing was a AJ 2/24 and on those the main jet was 100 and the needle jet 270. Sounds like there is something clogged in the carb, or the fuel level in the floater bowl too low, i...
by Frank
Sat Feb 15, 2020 1:42 pm
Forum: NZ Talk
Topic: Clutch cable adjustment
Replies: 2
Views: 3865

Re: Clutch cable adjustment

Hi Chris, Have you checked the 1/4" steel ball (pos. 18 in the image) is not missing between the clutch screw and the clutch rod (on the right side of the engine)? The correct tightening on the pressure springs are: tighten the adjuster nuts so much that 1mm of the studs comes through the nut (1mm o...
by Frank
Fri Feb 14, 2020 10:48 pm
Forum: Everything NZ 250
Topic: Tyre size for NZ 250
Replies: 3
Views: 3367

Re: Tyre size for NZ 250

Good Evening,

Correct size for NZ250 is 3.00-19

//Frank
by Frank
Tue Dec 24, 2019 4:03 pm
Forum: NZ Talk
Topic: Merry Christmas / Frohe Weihnachten
Replies: 13
Views: 12745

Re: Merry Christmas / Frohe Weihnachten

Merry Christmas to all NZ friends!

//Frank
by Frank
Tue Dec 03, 2019 10:31 pm
Forum: NZ Talk
Topic: NZ Rear frame
Replies: 2
Views: 3795

Re: NZ Rear frame

Hi,

Should be nice to get comments on this from some forum members who has seen many NZ´s: Panzergrau, Mila350, someone else??

//Frank