Good battery reproduction NZ 350

Basic info on DKW NZ 350's

Moderator: Mods

Post Reply
Nech
Tool Cleaner
Tool Cleaner
Posts: 62
Joined: Wed Jul 20, 2011 9:54 pm
Location: CZ

Good battery reproduction NZ 350

Post by Nech » Wed Aug 17, 2011 8:15 pm

Hi friends!

What do you mean, is this a good reproduction and will it fit to the standard battery holder? And does anyone of you experiences with 12AH battery on NZ 350? Works good?

http://classicdepartment.com/shop/popup ... 8a2b4517ee

Thanks!
Martin
User avatar
thomas591
Site Admin
Site Admin
Posts: 493
Joined: Sun Mar 26, 2006 1:55 pm
Location: Norderstedt / Northern Germany
Contact:

Re: Good battery reproduction NZ 350

Post by thomas591 » Thu Aug 25, 2011 8:59 am

Hi Martin,

thats the correct battery to fit the NZ. But I would advise you to get a contemporary outer case with modern lead-Acid-gel batteries inside.

Check here:

http://tinyurl.com/3ppwoqs


Regards


Thomas
Best regards - freundlichste Grüße

Thomas
Wilhelm_Heidkamp
Mechanic
Mechanic
Posts: 526
Joined: Wed Jan 02, 2008 8:33 pm
Location: Schleswig-Holstein, Germany

Re: Good battery reproduction NZ 350

Post by Wilhelm_Heidkamp » Thu Aug 25, 2011 12:46 pm

I would also recommend you to buy a modern gel cell battery. I bought the same battery shown in your link some years ago and I had to charge it nearly all two weeks. It`s capacity and usability is more than bad and you will have to clean the battery contacts of copper acetate all the time. Since I own a modern gel cell battery in an old housing, I never had to charge it, even not after wintertime.
DKW F 102 1965
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
User avatar
19landser42
Assistant Mechanic
Assistant Mechanic
Posts: 139
Joined: Fri Feb 29, 2008 7:14 pm
Location: Rockwood,MI United States

Re: Good battery reproduction NZ 350

Post by 19landser42 » Thu Aug 25, 2011 8:04 pm

I also run a modern gel cell battery, inside a reproduction case.It's the only way to go.
Jeff
Nech
Tool Cleaner
Tool Cleaner
Posts: 62
Joined: Wed Jul 20, 2011 9:54 pm
Location: CZ

Re: Good battery reproduction NZ 350

Post by Nech » Thu Aug 25, 2011 8:15 pm

Ok, thank you chaps!
So the question is, as I have zero experiences with such a cases - where to get the most suitable/good looking battery case?

Which looks better the one from classicdepartment (BLITZ) or the one from ebay?
User avatar
19landser42
Assistant Mechanic
Assistant Mechanic
Posts: 139
Joined: Fri Feb 29, 2008 7:14 pm
Location: Rockwood,MI United States

Re: Good battery reproduction NZ 350

Post by 19landser42 » Thu Aug 25, 2011 9:15 pm

I have the same type in the above link [battery case] not the blitz type. My gel battery holds a charge all summer. no problem.it's the way to go now.no more acid leaks destroying your paint,and less wieght.
Jeff
DARIVS
Assistant Mechanic
Assistant Mechanic
Posts: 136
Joined: Sun May 09, 2010 5:44 am
Location: Ramsey, Minnesota USA

Re: Good battery reproduction NZ 350

Post by DARIVS » Fri Aug 26, 2011 6:03 am

Wilhelm_Heidkamp wrote:I would also recommend you to buy a modern gel cell battery. I bought the same battery shown in your link some years ago and I had to charge it nearly all two weeks. It`s capacity and usability is more than bad and you will have to clean the battery contacts of copper acetate all the time. Since I own a modern gel cell battery in an old housing, I never had to charge it, even not after wintertime.
I hollowed out the lead acid battery casing when the battery died and put tow gel cell batterias inside, wired in parallel for my NZ 350-1. It LOOKS like an original acid battery, but isn't. It holds a charge much better!
User avatar
thomas591
Site Admin
Site Admin
Posts: 493
Joined: Sun Mar 26, 2006 1:55 pm
Location: Norderstedt / Northern Germany
Contact:

Re: Good battery reproduction NZ 350

Post by thomas591 » Fri Aug 26, 2011 8:06 am

..thats exactly what I did before these komplete kits were readily available.

Thomas
Best regards - freundlichste Grüße

Thomas
Post Reply