Pegusa seat 52 51 9 034 015
Moderator: Mods
Pegusa seat 52 51 9 034 015
Any one tried this with their NZ350 ? will it work, and how is the quality?
It is in the Adler bis Zundap PDF folder, and other places -
It is in the Adler bis Zundap PDF folder, and other places -
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: Pegusa seat 52 51 9 034 015
...should work, but far from original.
regards
Thomas
regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: Pegusa seat 52 51 9 034 015
thomas591 wrote:...should work, but far from original.
regards
Thomas
Thomas, have you any ide where to get something that looks more like the original? new or old, does not mather really.
W
-
- Mechanic
- Posts: 526
- Joined: Wed Jan 02, 2008 8:33 pm
- Location: Schleswig-Holstein, Germany
Re: Pegusa seat 52 51 9 034 015
This backseat does not fit, the mount holes are different from an original one.
DKW F 102 1965
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
-
- Assistant Mechanic
- Posts: 136
- Joined: Sun May 09, 2010 5:44 am
- Location: Ramsey, Minnesota USA
Re: Pegusa seat 52 51 9 034 015
Since there are no reproduction seat covers available, I had to use the seat cover from one of these postwar seats for the rear seat on my NZ 350-1. If Leszek at OldTimerGarage ever makes a repro seat cover, I'm buying the very first one!
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Pegusa seat 52 51 9 034 015
Leszek is not cooperative to make the bigger covers, he thinks that he could sell to less to compensate the costs for producing. I think he has wright.DARIVS wrote:Since there are no reproduction seat covers available, I had to use the seat cover from one of these postwar seats for the rear seat on my NZ 350-1. If Leszek at OldTimerGarage ever makes a repro seat cover, I'm buying the very first one!
A friend of mine is trying with somebody to reproduce the bigger cover.
The org. cover wich I have should function as example.
I have some "Moeve"-frames wich were almost the same as Pagusa.
It is possible to get new covers for them (post-war), I have to figger out wich and where.
Martin
-
- Mechanic
- Posts: 526
- Joined: Wed Jan 02, 2008 8:33 pm
- Location: Schleswig-Holstein, Germany
Re: Pegusa seat 52 51 9 034 015
Möve seats where mounted on AWO and EMW bikes. May be some dealers for these bikes offer them.
DKW F 102 1965
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Pegusa seat 52 51 9 034 015
I know, but I saw a picture from somebody who had mounted a post-war Pagusa-cover on it. I want that to.
-
- Assistant Mechanic
- Posts: 136
- Joined: Sun May 09, 2010 5:44 am
- Location: Ramsey, Minnesota USA
Re: Pegusa seat 52 51 9 034 015
Pagusa seat covers (front is Repro from OldtimerGarage, rear is postwar modern Pagusa seat cover).
Re: Pegusa seat 52 51 9 034 015
I think your bike looks grweat, and my goal is to make mine like yours, but I need a rear seat, so the rear pegusa you have, is it the same I asked about, or a different pegusa. the second problem is that, I have to get my bike validated by the authoreties (dont know the english word for it) but...... If I dont have a second seat mounted at the time, ot he bike will be typed as a singel bike, not fit for passangers. So for me there is two reasins, so something that looks good enough, pegusa is great, others will work. Any ideas ?? what should I get?
Will
Will
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Pegusa seat 52 51 9 034 015
Hello Will,
I have a (2) Moeve-frame for You, it is 99% the same as the org. Pagusa.
I'm trying to get new (post-war) Pagusa covers on them, like on the picture.
Sure I can order fitting Moeve-covers to, they have even the same profile as Pagusa. But I want to use the name Pagusa because of org.
I asked some members for wich cover I exactly need, some will figger that out fo me.
Martin
Pictures are from another Forum-member, they are only used as example.
I have a (2) Moeve-frame for You, it is 99% the same as the org. Pagusa.
I'm trying to get new (post-war) Pagusa covers on them, like on the picture.
Sure I can order fitting Moeve-covers to, they have even the same profile as Pagusa. But I want to use the name Pagusa because of org.
I asked some members for wich cover I exactly need, some will figger that out fo me.
Martin
Pictures are from another Forum-member, they are only used as example.
You do not have the required permissions to view the files attached to this post.
Re: Pegusa seat 52 51 9 034 015
Martdapp, looks very good, how much do they cost?, and can I buy from you?
W
W
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Pegusa seat 52 51 9 034 015
I contact you by pm.