wing DKW NZ or SB???
Moderator: Mods
-
- Tool Cleaner
- Posts: 25
- Joined: Mon Sep 28, 2009 7:11 pm
- Location: Russia
Re: wing DKW NZ or SB???
The fender is similar from SB and a taillight too, and a tailight on 2 and 7 a photo,from NZ-1
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: wing DKW NZ or SB???
The Rearfender looks NZ, the SB fender had a dent for placing the taillight, I don't see that on your picture. The taillight as seen in picture 7 is not from a NZ-1, but from a late SB or an early NZ. The NZ-1 never had those old taillights.
I would keep this part as it is, it is still good patina !
Martin
I would keep this part as it is, it is still good patina !
Martin
-
- Tool Cleaner
- Posts: 25
- Joined: Mon Sep 28, 2009 7:11 pm
- Location: Russia
Re: wing DKW NZ or SB???
Martin, greetings!
There can be it from NZ250???
There can be it from NZ250???
Re: wing DKW NZ or SB???
Hi BMW_WH.
Very nice fender. For me it is from NZ motorbike.
I have request for you. Can you give me dimensions A, B, C, D, E from picture below?
I will be very grateful for it.
Very nice fender. For me it is from NZ motorbike.
I have request for you. Can you give me dimensions A, B, C, D, E from picture below?
I will be very grateful for it.
Re: wing DKW NZ or SB???
Hello
A=75mm
B=28mm
C=35mm
D=102mm
E=22mm
Alex.
A=75mm
B=28mm
C=35mm
D=102mm
E=22mm
Alex.
Re: wing DKW NZ or SB???
Thanks for help.
Karol.
Karol.