350 nz - missing frame number

Basic info on DKW NZ 350's

Moderator: Mods

Post Reply
dkwwingo
Novize
Posts: 2
Joined: Sun Nov 20, 2011 3:07 pm

350 nz - missing frame number

Post by dkwwingo » Tue Dec 06, 2011 11:56 pm

[quote][/quote]dear all
pls. who can help me regarding the frame number ?
i bought a nz 350 but i cannot find any frame number stamped on the frame
the data plate is missing
my be somebody knows which is the reason there are no numbers on the frame ?
pls. reply
thanks to everybody
Mattia
Robertasj
Tool Cleaner
Tool Cleaner
Posts: 22
Joined: Mon Aug 29, 2011 5:13 pm

Re: 350 nz - missing frame number

Post by Robertasj » Wed Dec 07, 2011 12:52 pm

dkwwingo wrote:
dear all
pls. who can help me regarding the frame number ?
i bought a nz 350 but i cannot find any frame number stamped on the frame
the data plate is missing
my be somebody knows which is the reason there are no numbers on the frame ?
pls. reply
thanks to everybody
Mattia
Maybe there is a DKW with IZH frame? Or the number can be under the layer of paint.
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 422
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: 350 nz - missing frame number

Post by Frank » Wed Dec 07, 2011 7:21 pm

Hi,

If its a older NZ, thre is no frame number on the main frame itself, the frame number is stamped on the left rear frame triangle.

// Frank
dkwwingo
Novize
Posts: 2
Joined: Sun Nov 20, 2011 3:07 pm

Re: 350 nz - missing frame number

Post by dkwwingo » Fri Dec 09, 2011 11:08 am

Frank wrote:Hi,

If its a older NZ, thre is no frame number on the main frame itself, the frame number is stamped on the left rear frame triangle.

// Frank
Hallo Frank
Thank you very much
Mattia
Peter
Tool Cleaner
Tool Cleaner
Posts: 64
Joined: Sun May 28, 2006 3:27 pm
Location: Poland

Re: 350 nz - missing frame number

Post by Peter » Mon Dec 12, 2011 10:43 pm

Hello Guys,
this is topic about NZ350, but I have the same problem with NZ350-1 frame.
About 10 years ago I bought a frame with NZ350-1 chassis (with fork, fenders, triangles, tank, and small parts). All parts are original and from DKW (not IZH).
But there is only part number on the frame. Unfortunately there was no ID plate.
Take a look at the picture below. What do you think about that?
Regards
Peter
You do not have the required permissions to view the files attached to this post.
NZ350-1 '44
SB200A '37
KM200 '35
Post Reply