need help for crankshaft/vilebrequin in France
Moderator: Mods
need help for crankshaft/vilebrequin in France
Hi
I'm actually rebuilding my 350 nz alu engine
Someone can give me the reference of the bearing ball and seal of the crankshaft please ? (timken or SKF or other...)
thank you very much
I'm actually rebuilding my 350 nz alu engine
Someone can give me the reference of the bearing ball and seal of the crankshaft please ? (timken or SKF or other...)
thank you very much
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: need help for crankshaft/vilebrequin in France
....check ghe download sction! Bearings and seals.pdf
Regards
Thomas
Regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: need help for crankshaft/vilebrequin in France
The info in the download section about crankshaft seals are not correct, in the info there is stated 25x42x7 for the NZ 350, the right dimensions for the NZ 350 crank seals are 25x42x10
Best regards: Frank
Best regards: Frank
Re: need help for crankshaft/vilebrequin in France
Thank you Thomas and Frank but I don't understand where I can find the download section for the pdf
Could you give me the name of the ball bearing and seal manufactor please
best regards
Laurent
Could you give me the name of the ball bearing and seal manufactor please
best regards
Laurent
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: need help for crankshaft/vilebrequin in France
Best regards - freundlichste Grüße
Thomas
Thomas
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: need help for crankshaft/vilebrequin in France
@Frank
Many thanks for your input about the NZ350 seals! I have updated the files accordingly. You are absolutely correct, but when I rebuild my motor, the 10mm thick seals were not available, so I used 7mm thick seals and shimmed them accordingly.
Merry Christmas
Thomas
Many thanks for your input about the NZ350 seals! I have updated the files accordingly. You are absolutely correct, but when I rebuild my motor, the 10mm thick seals were not available, so I used 7mm thick seals and shimmed them accordingly.
Merry Christmas
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: need help for crankshaft/vilebrequin in France
Many thanks to you for the file.
Have you pictures from your engine restauration ?...or a picture of the bearing and the seals style...because I absolutely don't know what I have to find
Have you pictures from your engine restauration ?...or a picture of the bearing and the seals style...because I absolutely don't know what I have to find
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: need help for crankshaft/vilebrequin in France
Hello,
sorry,I do not have pictures. But the gaskets and the bearings, except for the crankshaft, are absolutely standard items. With the description 6203 and 6204 and the measurement of the radial gaskets, you will get the parts in ANY bearing shop.
Regards
Thomas
sorry,I do not have pictures. But the gaskets and the bearings, except for the crankshaft, are absolutely standard items. With the description 6203 and 6204 and the measurement of the radial gaskets, you will get the parts in ANY bearing shop.
Regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: need help for crankshaft/vilebrequin in France
I have all the gaskets and bearing for the engine...except for the crankshaft.
In two big bearing shop in Paris and Marseille I have asked but NOTHING for the crankshaft.
Where did you find yours ?
regards
moblo
In two big bearing shop in Paris and Marseille I have asked but NOTHING for the crankshaft.
Where did you find yours ?
regards
moblo
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: need help for crankshaft/vilebrequin in France
the bearings for the crankshaft are not available from any bearing shop. I only know two companys who overhaul the crankshafts an who make the bearings. As far as I know, they do not sell the bearings separately. One source might be
http://www.jbk-moto.de/
Regards
Thomas
http://www.jbk-moto.de/
Regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: need help for crankshaft/vilebrequin in France
Ok thank you.
So what is the solution to make my engine working ???
So what is the solution to make my engine working ???
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: need help for crankshaft/vilebrequin in France
Have your crankshaft rebuild by someone who knows exactly what he is doing.
I recommend:
http://www.jbk-moto.de/ ( takes approx. 3 months)
or
http://www.ebenheim.de/eikuma/ (takes up to 10 months)
Regards
Thomas
I recommend:
http://www.jbk-moto.de/ ( takes approx. 3 months)
or
http://www.ebenheim.de/eikuma/ (takes up to 10 months)
Regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: need help for crankshaft/vilebrequin in France
I think I will buy a new "second hand " lower engine and clean it a lot and it will be OK
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: need help for crankshaft/vilebrequin in France
I don't think that you will be very sucessful in finding a bottom end that just need "cleaning".
Merry Christmas
Thomas
Merry Christmas
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: need help for crankshaft/vilebrequin in France
OK
What about your machine ?
How did you do with your engine ?
Did you change your bearing and seals by new one ?( with a transformation of the crankshaft or other thing)
Or did you "clean" and replace them ?
What about your machine ?
How did you do with your engine ?
Did you change your bearing and seals by new one ?( with a transformation of the crankshaft or other thing)
Or did you "clean" and replace them ?