help with some catalog with parts of DKW 350 NZ 1 engine
Moderator: Mods
help with some catalog with parts of DKW 350 NZ 1 engine
hi friends, now i repair my NZ 1 iron engine and i am not sure, that all all parst are OK. Have somebody any catalog with complete war iron engine in PC?
thanks very much
thanks very much
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: help with some catalog with parts of DKW 350 NZ 1 engine
This catalogue is either lost or was never produced. One of the big mysteries in NZ history.
regards
Thomas
regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: help with some catalog with parts of DKW 350 NZ 1 engine
I think the IZH-350 parts manual is the closest you will come, until someone finds the 350-1 ETL, or if the IZH-350 manual is not the by russians modifed 350-1 original ETL
// Frank
// Frank
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: help with some catalog with parts of DKW 350 NZ 1 engine
The stock-numbers from the IZH-partlist are 'German', even some pictures are from a German list (WH-Stiefel). Much parts fhad still the Auto-union-rings.
Very plausible that they took the NZ-1 partlist and modified it for the first IZH 350. When You regard closer to this list, some nice parts are to see, even a Spritzkaennchen e.s.o.
Remember, the whole DKW-plant was build up a 1000km further eastwarts, they took everything, even the employees! Perhaps that the NZ-1 partlist was still not published and the blueprints went with the Russians to their country.
Regards, Martin
Very plausible that they took the NZ-1 partlist and modified it for the first IZH 350. When You regard closer to this list, some nice parts are to see, even a Spritzkaennchen e.s.o.
Remember, the whole DKW-plant was build up a 1000km further eastwarts, they took everything, even the employees! Perhaps that the NZ-1 partlist was still not published and the blueprints went with the Russians to their country.
Regards, Martin
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: help with some catalog with parts of DKW 350 NZ 1 engine
Hi Martin,
historically correct. I also see the possibility that the parts list for the 350-1 was never printed. Look how much later than the introduction of the 350-43 the partslist was issued. 01.07.1944! One year later!
Regards
Thomas
historically correct. I also see the possibility that the parts list for the 350-1 was never printed. Look how much later than the introduction of the 350-43 the partslist was issued. 01.07.1944! One year later!
Regards
Thomas
Best regards - freundlichste Grüße
Thomas
Thomas
Re: help with some catalog with parts of DKW 350 NZ 1 engine
hey please, guys, can anyone send me link on izh catalogue? or upload anywhere? PLEASE thanks very much!! it will help me very.
Re: help with some catalog with parts of DKW 350 NZ 1 engine
Hi,
Here is at least one on the web, maybe there are others too: http://foto.inbox.lv/tony350/IZH-350-sp ... logue-1950
// Frank
Here is at least one on the web, maybe there are others too: http://foto.inbox.lv/tony350/IZH-350-sp ... logue-1950
// Frank
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: help with some catalog with parts of DKW 350 NZ 1 engine
I think that Thomas has right about his opinion that the NZ 350-1 partlist was never printed, perhaps that there were blueprints that went to Russia.
Same counts for the RT 125-nA partlist, there is only a simple typed version from a partlist with stocknumbers known, printed at a time that the motorcycle was already a long time in production.
Somehow the DKW-plant must have archives for their own factory, but I think they will be gone. However,.....did any-one tried before to reach the old ISH-archives? They won't be TOP SECRET any more I think.
Does a Russian member or a good Russian speaking person could do research on the ISH-factory wich still exist ?
Martin,
Same counts for the RT 125-nA partlist, there is only a simple typed version from a partlist with stocknumbers known, printed at a time that the motorcycle was already a long time in production.
Somehow the DKW-plant must have archives for their own factory, but I think they will be gone. However,.....did any-one tried before to reach the old ISH-archives? They won't be TOP SECRET any more I think.
Does a Russian member or a good Russian speaking person could do research on the ISH-factory wich still exist ?
Martin,