Hasag front lamp
Moderator: Mods
Hasag front lamp
Hi,
Could this lamp be from NZ350 ?
thanks
Martins
Could this lamp be from NZ350 ?
thanks
Martins
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: Hasag front lamp
..without any measurements this is difficult to tell
Best regards - freundlichste Grüße
Thomas
Thomas
Re: Hasag front lamp
OK
I will give more detailed info
in evening
I will give more detailed info
in evening
Re: Hasag front lamp
iner diameter for glass rim = 187mm
depth = 120mm
round size = 59cm
diameter of smaler hole = 55mm
my measurments are not very precise, but i think the lamp
belongs to early NZ350
if comparing with the picture from the forum parts section
Martins
depth = 120mm
round size = 59cm
diameter of smaler hole = 55mm
my measurments are not very precise, but i think the lamp
belongs to early NZ350
if comparing with the picture from the forum parts section
Martins
Re: Hasag front lamp
Hi Martins,
Seems to be a Hasag M165 for NZ 1938-43. I measured a lamp housing I have and the measurements are quite the same as you gave.
// Frank
Seems to be a Hasag M165 for NZ 1938-43. I measured a lamp housing I have and the measurements are quite the same as you gave.
// Frank
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: Hasag front lamp
Yep,
I agree! But were will you get the bottom part from???
I agree! But were will you get the bottom part from???
Best regards - freundlichste Grüße
Thomas
Thomas
Re: Hasag front lamp
this lamp was a barn find,
maybe i will find the missing part as well
How many type of lamps were fitted on nz350 ?
I also found hand lever for Zundapp K500
if any of interest
regards
Martins
maybe i will find the missing part as well
How many type of lamps were fitted on nz350 ?
I also found hand lever for Zundapp K500
if any of interest
regards
Martins
Re: Hasag front lamp
Hi,
Hasag 165 was the only type used on NZ 250/350/500. NZ350/1943 used Hasag 130 and NZ350-1 used Bosch.
// Frank
Hasag 165 was the only type used on NZ 250/350/500. NZ350/1943 used Hasag 130 and NZ350-1 used Bosch.
// Frank