Gelenkhebel, Oberer 122656

Basic info on DKW NZ 350's

Moderator: Mods

Post Reply
Freddieab
Tool Cleaner
Tool Cleaner
Posts: 20
Joined: Sat Mar 12, 2011 12:45 pm
Location: UK

Gelenkhebel, Oberer 122656

Post by Freddieab » Mon Sep 24, 2012 5:49 pm

Hi All,

I am trying to decide which Gelenkhebel should be on my '45 350-1. I am hoping someone here will have a difinitive answer. I have a couple of Gelenkhebel but they are all different.

The main differences between them is shown in this thread
viewtopic.php?f=1&t=186&p=383&hilit=Obe ... hebel#p383

The numbers shown on mine are 122656-0, 122656-2 and a couple have no numbers. The Ersatzteilliste specifies 122656-3, but this is upto '43,'44. Is this one different again? And what of later models?

I would assume the -X number is a version number with -0 being the earliest. But what was the latest?

Can anyone help with this or is it irrelevant as they all fit anyway?

I would be greatful if anyone could shed some light on this.

Regards
Freddie
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 422
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: Gelenkhebel, Oberer 122656

Post by Frank » Mon Sep 24, 2012 7:43 pm

Hi Freddie,

Quite confusing! According to the parts manual 605-12 the NZ350/1943 oberer gelenkhebel shall have part number 122656-3 and also the IZH-350 manual gives part number 122656-3.

I have a spare gelenkhebel with part number 122656-3 and it looks totally different than the one shown in the D605-12!

I am quite sure that the 122656-3 gelenkhebel I have is from a IZH-350, because there is not any signs of any Wehrmacht color on it, the first layer of colour is black.

Try to contact forum member Zylinder who has a 100% original NZ 350-1 and ask him about the correct partnumber for the 350-1 oberer gelenkhebel.

// Frank
Freddieab
Tool Cleaner
Tool Cleaner
Posts: 20
Joined: Sat Mar 12, 2011 12:45 pm
Location: UK

Re: Gelenkhebel, Oberer 122656

Post by Freddieab » Tue Sep 25, 2012 6:55 pm

Hi Frank,

Thank you for the answer. I looked at Zylinders thread on his bike. I have a Gelenkhebel that looks very similar to the one shown in his photos so I guess I will use that one.

Cheers
Post Reply