Hi All,
I am trying to decide which Gelenkhebel should be on my '45 350-1. I am hoping someone here will have a difinitive answer. I have a couple of Gelenkhebel but they are all different.
The main differences between them is shown in this thread
viewtopic.php?f=1&t=186&p=383&hilit=Obe ... hebel#p383
The numbers shown on mine are 122656-0, 122656-2 and a couple have no numbers. The Ersatzteilliste specifies 122656-3, but this is upto '43,'44. Is this one different again? And what of later models?
I would assume the -X number is a version number with -0 being the earliest. But what was the latest?
Can anyone help with this or is it irrelevant as they all fit anyway?
I would be greatful if anyone could shed some light on this.
Regards
Freddie
Gelenkhebel, Oberer 122656
Moderator: Mods
Re: Gelenkhebel, Oberer 122656
Hi Freddie,
Quite confusing! According to the parts manual 605-12 the NZ350/1943 oberer gelenkhebel shall have part number 122656-3 and also the IZH-350 manual gives part number 122656-3.
I have a spare gelenkhebel with part number 122656-3 and it looks totally different than the one shown in the D605-12!
I am quite sure that the 122656-3 gelenkhebel I have is from a IZH-350, because there is not any signs of any Wehrmacht color on it, the first layer of colour is black.
Try to contact forum member Zylinder who has a 100% original NZ 350-1 and ask him about the correct partnumber for the 350-1 oberer gelenkhebel.
// Frank
Quite confusing! According to the parts manual 605-12 the NZ350/1943 oberer gelenkhebel shall have part number 122656-3 and also the IZH-350 manual gives part number 122656-3.
I have a spare gelenkhebel with part number 122656-3 and it looks totally different than the one shown in the D605-12!
I am quite sure that the 122656-3 gelenkhebel I have is from a IZH-350, because there is not any signs of any Wehrmacht color on it, the first layer of colour is black.
Try to contact forum member Zylinder who has a 100% original NZ 350-1 and ask him about the correct partnumber for the 350-1 oberer gelenkhebel.
// Frank
Re: Gelenkhebel, Oberer 122656
Hi Frank,
Thank you for the answer. I looked at Zylinders thread on his bike. I have a Gelenkhebel that looks very similar to the one shown in his photos so I guess I will use that one.
Cheers
Thank you for the answer. I looked at Zylinders thread on his bike. I have a Gelenkhebel that looks very similar to the one shown in his photos so I guess I will use that one.
Cheers