HASAG ignition key dimensions

Basic info on DKW NZ 350's

Moderator: Mods

Post Reply
stalker
Assistant Mechanic
Assistant Mechanic
Posts: 108
Joined: Wed Jun 18, 2008 8:47 pm
Location: Hungary

HASAG ignition key dimensions

Post by stalker » Thu Sep 05, 2013 3:46 pm

Hi,

Could someone please help me out with the dimensions of the HASAG ignition key (the one for NZ 250, the key part is pretty easy, could be made out of a metal "sheet" with a depth of a few millimetres...)?

I do have the switch, though lack the key...

Regards
Martze
Novize
Posts: 16
Joined: Mon Nov 12, 2012 11:12 pm

Re: HASAG ignition key dimensions

Post by Martze » Fri Sep 27, 2013 10:33 pm

stalker wrote:Hi,

Could someone please help me out with the dimensions of the HASAG ignition key (the one for NZ 250, the key part is pretty easy, could be made out of a metal "sheet" with a depth of a few millimetres...)?

I do have the switch, though lack the key...

Regards
Lock here!

http://www.ebay.de/itm/Zundschlussel-HA ... 5af1d5db03
stalker
Assistant Mechanic
Assistant Mechanic
Posts: 108
Joined: Wed Jun 18, 2008 8:47 pm
Location: Hungary

Re: HASAG ignition key dimensions

Post by stalker » Wed Oct 09, 2013 10:54 am

Martze wrote:
stalker wrote:Hi,

Could someone please help me out with the dimensions of the HASAG ignition key (the one for NZ 250, the key part is pretty easy, could be made out of a metal "sheet" with a depth of a few millimetres...)?

I do have the switch, though lack the key...

Regards
Lock here!

http://www.ebay.de/itm/Zundschlussel-HA ... 5af1d5db03

Hi!

Thanks for answering... Though I would rather like to make my own based on some measurements... this one looks a bit... well it is not that beautiful, the guy would be better of making it out of a metal sheet completely

Best Regards
Martze
Novize
Posts: 16
Joined: Mon Nov 12, 2012 11:12 pm

Re: HASAG ignition key dimensions

Post by Martze » Mon Nov 04, 2013 9:05 pm

Here is a better replica. I bought it too and find it very good.
http://www.ebay.de/itm/DKW-Nz-350-Zunds ... 3a86cd5446
regards
stalker
Assistant Mechanic
Assistant Mechanic
Posts: 108
Joined: Wed Jun 18, 2008 8:47 pm
Location: Hungary

Re: HASAG ignition key dimensions

Post by stalker » Fri Nov 22, 2013 1:23 pm

Martze wrote:Here is a better replica. I bought it too and find it very good.
http://www.ebay.de/itm/DKW-Nz-350-Zunds ... 3a86cd5446
regards

Thank you very much for answering! Could you just measure the notches with a caliper if it is not a problem for you? I have access to laser cutting so it is better for me to manufacture it by myself (the same applies for the upper part of the key too...)

These are the required dimensions presented on a sketch (in case the upper two notches on the key are symmetrically placed on the key), plus the thickness is a required information too:

Image


Best Regards
Post Reply