Hi All,
Had a bit of an accident on my NZ last week end. I was doing about 60 KPH and I wanted to slow down to pull over into a parking place. When I put on the front brake the front wheel went over to hard right, and I skated down the road persued by the bike. Not to much damage to me or the bike, although I will need a new headlamp. Thanks to the armour in my jacket.
I have checked all the wheel alignment, tyres and spokes all seem OK front brake is fine not locked on. The only thing I was running low tyre pressure on the front. What does every one use? The manual quotes a very low pressure by modern standards.
Thanks Rob
Tyre Pressure
Moderator: Mods
-
- Tool Cleaner
- Posts: 55
- Joined: Sat Apr 08, 2006 2:04 pm
- Location: Ashford, Kent, UK
Tyre Pressure
Thanks
Rob
Rob
-
- Site Admin
- Posts: 115
- Joined: Sat Mar 25, 2006 11:40 pm
- Location: Bulgaria
- Contact:
-
- Tool Cleaner
- Posts: 55
- Joined: Sat Apr 08, 2006 2:04 pm
- Location: Ashford, Kent, UK
-
- Tool Cleaner
- Posts: 55
- Joined: Sat Apr 08, 2006 2:04 pm
- Location: Ashford, Kent, UK