Hello All
Does anyone have a workshop manual for the NZ350-1.
Any information would be greatly received.
Many thanks
Rick
NZ350-1
Moderator: Mods
Re: NZ350-1
Hi Rick,
There are no workshop, or spare part manuals for the 350-1.
//Frank
There are no workshop, or spare part manuals for the 350-1.
//Frank
Re: NZ350-1
Hi,
there is a 1944 workshop manual for DKW bikes, including information about NZ350-1.
You find it on www.greiner-oldtimerteile.de als a download.
There is also a military manual D605/27, you can buy copys, where, you should find by google.
Regards, Matthias
there is a 1944 workshop manual for DKW bikes, including information about NZ350-1.
You find it on www.greiner-oldtimerteile.de als a download.
There is also a military manual D605/27, you can buy copys, where, you should find by google.
Regards, Matthias
Re: NZ350-1
Hi,
I was a bit unclear in my answer.
Matthias is right, there is no specific w/s manual for the 350-1, but there are some info in the common DKW w/s manual, not much, but some technical specifications, carb specifications and info and drawings about the electrical system.
The manual is dated 1 April 1944, so it was just when 350-1 was launched, so probably they never had time to update the manual with all info about the 350-1.
But I dont think its a big issue because most of the things are quite similar as on the "normal" NZ350.
The operators manual D605/27 has almost the same and in some cases better info than the common w/s manual.
//Frank
I was a bit unclear in my answer.
Matthias is right, there is no specific w/s manual for the 350-1, but there are some info in the common DKW w/s manual, not much, but some technical specifications, carb specifications and info and drawings about the electrical system.
The manual is dated 1 April 1944, so it was just when 350-1 was launched, so probably they never had time to update the manual with all info about the 350-1.
But I dont think its a big issue because most of the things are quite similar as on the "normal" NZ350.
The operators manual D605/27 has almost the same and in some cases better info than the common w/s manual.
//Frank
Re: NZ350-1
Thanks for your replies.
Very much appreciated.
Rick
Very much appreciated.
Rick