NZ350-1

Basic info on DKW NZ 350's

Moderator: Mods

Post Reply
gsybsa
Novize
Posts: 6
Joined: Sat Mar 25, 2017 11:06 am

NZ350-1

Post by gsybsa » Sun May 07, 2017 1:26 pm

Hello All

Does anyone have a workshop manual for the NZ350-1.
Any information would be greatly received.

Many thanks

Rick
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 422
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: NZ350-1

Post by Frank » Sun May 07, 2017 9:54 pm

Hi Rick,

There are no workshop, or spare part manuals for the 350-1.

//Frank
Nasenbär
Assistant Mechanic
Assistant Mechanic
Posts: 150
Joined: Sun Jun 16, 2013 8:35 pm

Re: NZ350-1

Post by Nasenbär » Sun May 07, 2017 11:01 pm

Hi,
there is a 1944 workshop manual for DKW bikes, including information about NZ350-1.
You find it on www.greiner-oldtimerteile.de als a download.
There is also a military manual D605/27, you can buy copys, where, you should find by google.
Regards, Matthias
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 422
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: NZ350-1

Post by Frank » Mon May 08, 2017 6:20 pm

Hi,

I was a bit unclear in my answer.

Matthias is right, there is no specific w/s manual for the 350-1, but there are some info in the common DKW w/s manual, not much, but some technical specifications, carb specifications and info and drawings about the electrical system.

The manual is dated 1 April 1944, so it was just when 350-1 was launched, so probably they never had time to update the manual with all info about the 350-1.
But I dont think its a big issue because most of the things are quite similar as on the "normal" NZ350.

The operators manual D605/27 has almost the same and in some cases better info than the common w/s manual.

//Frank
gsybsa
Novize
Posts: 6
Joined: Sat Mar 25, 2017 11:06 am

Re: NZ350-1

Post by gsybsa » Wed May 10, 2017 7:13 pm

Thanks for your replies.

Very much appreciated.

Rick
Post Reply