DKW NZ350 rear fender bracket measurements

Basic info on DKW NZ 350's

Moderator: Mods

Post Reply
berglund
Novize
Posts: 15
Joined: Mon Aug 31, 2015 1:49 pm
Location: Estonia, Tallinn

DKW NZ350 rear fender bracket measurements

Post by berglund » Thu Mar 15, 2018 12:37 pm

Hi,

Can anyone give me measurements of DKW NZ 350 (1939, alum. engine) rear fender bracket?
A-? B-? C-?, and the diameter of material used.

http://fotoalbum.ee/photos/berglund/111514141/



Berglund
Nasenbär
Assistant Mechanic
Assistant Mechanic
Posts: 150
Joined: Sun Jun 16, 2013 8:35 pm

Re: DKW NZ350 rear fender bracket measurements

Post by Nasenbär » Sat Mar 17, 2018 3:31 pm

Hello,
A: 70mm
B: 130mm
C: 370mm
D: 15mm
Regards, Matthias
Motorboy13
Tool Cleaner
Tool Cleaner
Posts: 92
Joined: Fri Feb 15, 2013 11:24 pm
Location: The Netherlands

Re: DKW NZ350 rear fender bracket measurements

Post by Motorboy13 » Sat Mar 17, 2018 4:12 pm

was the38-41 NZ 350 fender not 150MM wide ???????? mine old one is!!!!!
#-o
berglund
Novize
Posts: 15
Joined: Mon Aug 31, 2015 1:49 pm
Location: Estonia, Tallinn

Re: DKW NZ350 rear fender bracket measurements

Post by berglund » Sat Mar 17, 2018 5:23 pm

Thank you Matthias!

Mine fender is about 150mm wide, but the bracket must be narrower at the top to fit inside the fender. I think 130 mm bracket is fine.

Regards,
Berglund
Motorboy13
Tool Cleaner
Tool Cleaner
Posts: 92
Joined: Fri Feb 15, 2013 11:24 pm
Location: The Netherlands

Re: DKW NZ350 rear fender bracket measurements

Post by Motorboy13 » Sat Mar 17, 2018 6:54 pm

:lol: your 100% write !! it must be smaller to fit!! sory for that!! #-o
Post Reply