Hello,
I own a NZ350 and I can't get her into 4th gear.
I succeded once or twice, but most of the times the engin jumps inbetween 3rd and 4th (neutral) . I have tried to disconnect the hand shifter, to make shure it's not that lever that blocs, but without result.
Is there someone who has experienced the same problem, and is there a simple sollution without opening the entire engine?
Tnx
Bjorn
Gear shifting problem
Moderator: Mods
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Re: Gear shifting problem
Hi,
I am facing the same problem with my bike. Is there a difference when you use the handshifter?
Regards
Thomas
I am facing the same problem with my bike. Is there a difference when you use the handshifter?
Regards
Thomas
gear problems
hi there folks i had the same problem when i overhauld my engine
it thook my a day to figur it out the spring that locks yhe gearrol {kurvenwalze} was to strong the spring pulls the kurvenwalze in the gear if you shift from 3e to 4e gear they go in on half the teeth the spring pulls it in complete is the spring broken or to strong it "jumps"back to 3e or in neutral between the gears mostly whit the sound of grinding teeth the only way to check of the spring is broken or to strong disasembly the gearbox cover greetings m.markerink
it thook my a day to figur it out the spring that locks yhe gearrol {kurvenwalze} was to strong the spring pulls the kurvenwalze in the gear if you shift from 3e to 4e gear they go in on half the teeth the spring pulls it in complete is the spring broken or to strong it "jumps"back to 3e or in neutral between the gears mostly whit the sound of grinding teeth the only way to check of the spring is broken or to strong disasembly the gearbox cover greetings m.markerink