Hello,
I received an email from an NZ-owner with a interesting question:
"Have you ever seen this part? Its the cable clip that holds the wiring to the main frame, I think its original. Its made from spring steel, 10mm wide 40mm long, fits through the small wire loops on the frame, just a push fit"....there were 3 of these clips fitted to the frame, under the petrol tank, they had been heavily painted over with red paint ( the bike was painted red post war) I didn't realise that they were there at first till I came to clean up the frame.
The maiframe has these small wire lugs were this spring should be pushed ito. See below:
I did not found this clip in the partsbooks. Who has found these sprinclips on his bike? This would confirm that the spring is an original item
RSVP
Thomas
RSVP: Wiring Clips on Frame of NZ350-1
Moderator: Mods
-
- Novize
- Posts: 12
- Joined: Sun Feb 24, 2008 10:15 pm
- Location: Österreich
-
- Tool Cleaner
- Posts: 55
- Joined: Sat Apr 08, 2006 2:04 pm
- Location: Ashford, Kent, UK