mounting brackets and saddlebags.

Post by **19landser42** » Tue Apr 07, 2009 9:05 pm

I'm going to order a set of all natural leather saddlebags for my 1939 nz250,from oldtimer garager in Poland.My Question is what type of mounting brackets do i need for this installation?is this the correct items i need for the install?check items below.also what type of bolts are needed?
thanks guys
jeff
http://i11.photobucket.com/albums/a194/ ... erbags.jpg
http://i11.photobucket.com/albums/a194/ ... braket.jpg
http://i11.photobucket.com/albums/a194/ ... braket.jpg

Rob Hickmott · Post by **Rob Hickmott** » Tue Apr 07, 2009 11:37 pm

Hi,

I think the earlier NZ uses these brackets. The 1943 type and the 350-1 uses the pressed steel type.

I am still looking for the late bracket so we can get some made, there are quite a few people who want them on here.

Post by **martdapp** » Wed Apr 08, 2009 8:51 pm

Hi Jeff,
The things You want to buy, are good for Your 39 NZ.
I saw that things last summer with my own eyes.
The bags are realy good and the brackets are also fine,
The brackets are not exact the same as the org.-ones, but pretty close.

Rob, the metal-pressed brackets for the later NZ's are also for sale by the Oldtimer-garage!
F.r.
Martin

Post by **19landser42** » Fri Apr 10, 2009 11:39 am

thanks Rob,and Martin.
jeff

Post by **Wilhelm_Heidkamp** » Fri Apr 10, 2009 12:15 pm

Where have you found the later steel-pressed type of brackets at oldtimer-garage? I found there only the early type for the NZ 250/350 until 1943. Could you please post the link? Or is there just no picture available?

These are the ones we are searching for:

mounting brackets and saddlebags.

mounting brackets and saddlebags.

Re: mounting brackets and saddlebags.