Page 1 of 2
My DKW now has a new owner
Posted: Fri Dec 18, 2009 4:01 pm
by cudaman82
Its with a heavy heart that I part with my DKW NZ 350-1 but I decided to sell it to purchase a MP40 here in the US (MP40's are expensive here due to the registration system having closed down in 1984). Anyhow the new owner will be receiving his bike here before the end of January and I will be informing him to stop by and register here to get info/parts/etc. I have had an amazing time owning my DKW over the last 2 years and I really hope that in the future I can pick up another one. These are truely robust and beautiful motorcycles and I'd pick a DKW over a BMW or Zundapp any day of the week. Thanks again for everyones help here and I wish you the best with the new year! Happy Holidays!
-Tim in VA
Posted: Mon May 10, 2010 9:08 am
by DARIVS
Cudaman82 sold his NZ 350-1 to me. After a few repairs and parts replacements, it is now in better condition and runs very well. Does anyone have any good pictures of the lower chain guard? I need to make a replica of one.
Posted: Mon May 10, 2010 9:34 pm
by thomas591
...in case you do not want to make it yourself, than check here:
http://www.oldtimergarage.eu/store/prod ... cts_id=476
Welcome to the forum
Thomas
Posted: Mon May 10, 2010 10:28 pm
by DARIVS
Thanks, but for this part, I would rather make a reproduction myself. Does anyone have pictures or dimensions of the lower chain guard?
Also, the light on the rear fender is made from bakelite and is not similar to other NZ 350-1 light's I have seen. Is this part from an IZH 350?
Posted: Tue May 11, 2010 8:30 am
by thomas591
The taillamp looks like a early 50's (maybe wartime) "Eber" taillight. In any case, it is not correct.
Regards
Thomas
Posted: Wed May 12, 2010 9:37 am
by DARIVS
Thanks Thomas, I am considering replacing it.
Posted: Wed May 12, 2010 9:58 am
by RTWOLLE
Hallo,
the tail light is a tail light by IKA (witch nose), DDR of about 1950-56, used at IFA RT125, EMW, AWO.
If it is original, too rare and much sought after.
We could swap.
Regards
RTWOLLE
Posted: Wed May 12, 2010 10:06 pm
by DARIVS
Posted: Wed May 12, 2010 10:33 pm
by RTWOLLE
Hi,
Can you take me a photo of the base plate and a photo showing the inside of the rearlight? As can be seen if it is original or a reproduction.
And I have to look if I have a complete rearlight for NZ.
Regards
RTWOLLE
Posted: Wed May 12, 2010 11:02 pm
by DARIVS
Here is what the internals look like.
Posted: Mon May 17, 2010 11:57 am
by RTWOLLE
Hi,
Your tail light is an original.
Below a picture from the rear light I could offer.
The hole pitch of your tail light is about 76 mm, in the photo 78mm - 82mm
Regards
RTWOLLE
Posted: Tue May 18, 2010 1:59 am
by DARIVS
That tail light looks just fine. Thanks, RTWOLLE. Please check your Private mail. Vielen Dank!
Posted: Wed May 19, 2010 1:15 am
by DARIVS
RTWOLLE, I sent you the "witches nose" tail light in the mail today. It should arrive in one week. Please send me the DKW tail light as soon as possible, so I can ride my motorcycle again legally. (We require tail lights here!)
Posted: Wed May 19, 2010 11:05 pm
by RTWOLLE
Hi Kurt,
if your tail light is there, I will immediately submit the others. So you can drive again!
regards
Wolfgang
Posted: Wed May 19, 2010 11:54 pm
by DARIVS
You tail light is in the mail.
Ihr Endstücklicht ist in der Post.
Vielen Dank, RTWOLLE!
Kurt