Kupplungslamelle

Basic info on DKW NZ 350's

Moderator: Mods

Post Reply
Gotrick
Tool Cleaner
Tool Cleaner
Posts: 84
Joined: Tue Mar 04, 2008 9:34 pm
Location: Holland, Castricum

Kupplungslamelle

Post by Gotrick » Mon Aug 09, 2010 6:44 pm

My kuplungslamelle are worn out, i need to buy new ones.
Has anyone got any experience with buying these?

I see them for 15,60 Euro on this website: http://www.heumannzweirad.de

But for 41,80 Euro on this website: http://www.greiner-oldtimerteile.de/sea ... en&x=0&y=0

Thats a big difference :?
I e-mailed the first company for more info, but no reply yet.
I don´t want crap, so lean towards the expensive ones..
User avatar
thomas591
Site Admin
Site Admin
Posts: 493
Joined: Sun Mar 26, 2006 1:55 pm
Location: Norderstedt / Northern Germany
Contact:

Post by thomas591 » Wed Aug 11, 2010 11:38 am

are you looking for clutchplates for a 350 or a 350-1? The ones used for the 350 use cork as friction pads, the one for the -1 is made of "modern" lining material. The pads are not interchangeable.

Regards


Thomas
Gotrick
Tool Cleaner
Tool Cleaner
Posts: 84
Joined: Tue Mar 04, 2008 9:34 pm
Location: Holland, Castricum

Post by Gotrick » Wed Aug 11, 2010 7:41 pm

Its for my nz 350.

How do the 350-1 clutch plates look? i got a few very strange ones here as well.
They are black.
User avatar
thomas591
Site Admin
Site Admin
Posts: 493
Joined: Sun Mar 26, 2006 1:55 pm
Location: Norderstedt / Northern Germany
Contact:

Post by thomas591 » Thu Aug 12, 2010 10:35 pm

Important is the number of "taps" on the circumference of the friction disk. The NZ has 6 the 350 -1 has 8 taps.

Try to use the "search" tool in the forum. This topic has been covered before.


Regards

Thomas
User avatar
thomas591
Site Admin
Site Admin
Posts: 493
Joined: Sun Mar 26, 2006 1:55 pm
Location: Norderstedt / Northern Germany
Contact:

Post by thomas591 » Thu Aug 12, 2010 11:05 pm

...check this thread!

viewtopic.php?t=53&highlight=clutch

You have to pay nearly €170 for the clutch disks at Greiner. For a bit more you will get a completely overhauled clutch -including he clutchcage and steelplates from Erb.

Regards


Thomas
Post Reply