korkscheiben

Dirk · Post by **Dirk** » Sat Sep 10, 2011 2:31 pm

Hello,

Where to buy new or nos korkscheiben??
Can't find theme at geyer's site, I need a new set of them since the one's
that are inside now are quit worn out.

Greetings, Dirk

Post by **martdapp** » Sun Sep 11, 2011 1:54 pm

For wich type NZ Dirk,
250-350/38-43 or NZ-1?

Dirk · Post by **Dirk** » Sun Sep 11, 2011 2:37 pm

Hi Martin,

It's for the nz 350, but yesterday I found them at greiner's by the name kuplungslammele and not korkscheiben, only to find out that they cost 41,60e a piece!
That mean's 160e since I need 4 for my nz 350.
A single piece of kork cost's 0,70e, you need 96 of them so just replacing the kork
cosst just 67e!
Anyone who has done that before?

Greetings Dirk

Lolo · Post by **Lolo** » Mon Sep 12, 2011 9:21 am

Hello Dirk,

Yes, I have change all the korks one time. It's a long time to pass but it's possible. When you have put all the korks, you have to equalize to have the same thickness everywhere. I made the equalize on turn machine.

Regards,
Lolo.

Post by **thomas591** » Mon Sep 12, 2011 7:46 pm

Dirk,

if you glue some sandpaper to a piece of glass (old mirror i.e) you should be able to bring the cork pieces all to the same height.

Regards

Thomas

Dirk · Post by **Dirk** » Mon Sep 12, 2011 9:12 pm

Hello Lolo and Thomas,

Thank you for your reply's and the usefull info!

Greetings Dirk

korkscheiben

korkscheiben

Re: korkscheiben

Re: korkscheiben

Re: korkscheiben

Re: korkscheiben

Re: korkscheiben