NZ 350 Bits and pieces required in South Africa

Here you can post your want adds for NZ 350, 350-1 parts

Moderator: Mods

Post Reply
Sharing Roads
Novize
Posts: 1
Joined: Wed Apr 08, 2015 2:41 pm

NZ 350 Bits and pieces required in South Africa

Post by Sharing Roads » Wed Apr 08, 2015 6:42 pm

Good day fellow DKW lovers.


I collected my "barn find" over the weekend.

The plan is to clean it up (it was sitting outside in the harsh South African conditions), redo the wiring with new, replace the tubes and tyres, but other than that keep it as is.

My problem is that it is a NZ350, but the bits of engine I got with it belongs to a NZ250. The ideal is to find a 350 engine, and help others who might require the bits I have.

I will update this post often as I go along, due to the huge amount of small bits and pieces I need.

The immediate list is.
1) NZ 350 Engine (Complete)
2) Seat - used but must be usable.
3) Left hand levers.
4) Big black knob behind the speedo(Guessing it ajust the shocks.
5) Possibly front shck/spring. I got 3 pieces in there.
5) Chain guard
6) Rider pegs (or at least the rubber that go over them'
7) Rear footpegs
8) Rubbers on side of tank.
9) Bits inside carburator but will make a separate list (Mainly float bowl complete)

If you have any leeds, I will appreciate it.

I am not in a hurry, but it will be nice to have a list when ned it. Also please ensure the leeds will actually send to South Africa. I usually pay the money direct into their account, and am happy to wait until it is available before they send the item, so ideal in people who is not out for a quick buck. I can get somebody to collect in Denmark, and somewhere in Canada.
martdapp
Master Mechanic
Master Mechanic
Posts: 949
Joined: Sat Jan 19, 2008 9:46 am
Location: Hoensbroek Niederlande

Re: NZ 350 Bits and pieces required in South Africa

Post by martdapp » Thu Apr 09, 2015 12:31 am

Hi, I have a lot of NZ-parts, please mail me for pictures etc.
martdapp@hotmail.com
F.r. Martin

The immediate list is.
1) NZ 350 Engine (Complete)
2) Seat - used but must be usable. I have one with new correct Pagussa seatcover
3) Left hand levers.
4) Big black knob behind the speedo(Guessing it ajust the shocks. I have it
5) Possibly front shck/spring. I got 3 pieces in there.
5) Chain guard I have both, up and lower chain guard
6) Rider pegs (or at least the rubber that go over them'
7) Rear footpegs
Rubbers on side of tank.
9) Bits inside carburator but will make a separate list (Mainly float bowl complete)
Post Reply