Hello- The splines on my kickstarter is very bad, so looking for a better one!!
Please let me know if you have a spare, or know of any source for one!
Please post here or PM me!
Thanks
Svenn
Kickstarter
Moderator: Mods
-
- Mechanic
- Posts: 526
- Joined: Wed Jan 02, 2008 8:33 pm
- Location: Schleswig-Holstein, Germany
Hello Svenn,
if you only need all parts of the kickstarter except for the metal-bar to rest your foot on while starting, you will find a new one at the site www.dkw-geyer.de in the category "News and offers" or using the part number 4595-13511-01. That´s the starter for an RT 200/RT250 but it is absolutely the same as the NZ part, except for the fact that the metal-bar is covered with rubber and has no grip-rings. This part was mounted on my NZ when I bought it and so I can state that it will fit an NZ. I got a new metal-bar from an SB-Kickstarter and now it works as it should.
if you only need all parts of the kickstarter except for the metal-bar to rest your foot on while starting, you will find a new one at the site www.dkw-geyer.de in the category "News and offers" or using the part number 4595-13511-01. That´s the starter for an RT 200/RT250 but it is absolutely the same as the NZ part, except for the fact that the metal-bar is covered with rubber and has no grip-rings. This part was mounted on my NZ when I bought it and so I can state that it will fit an NZ. I got a new metal-bar from an SB-Kickstarter and now it works as it should.
DKW F 102 1965
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel