HELLA horn/hupe wanted!
Moderator: Mods
HELLA horn/hupe wanted!
Hi guys,
Looking for a hella horn for my dkw nz 350..
greetings Dirk
Looking for a hella horn for my dkw nz 350..
greetings Dirk
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
Hi Darius,
for the -1 you should search for a SECO horn not Hella!
They are very, very, very rare but there is one at e-bay right now:
http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... K:MEWAX:IT
Regards
Thomas
for the -1 you should search for a SECO horn not Hella!
They are very, very, very rare but there is one at e-bay right now:
http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... K:MEWAX:IT
Regards
Thomas
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
To my knowledge (as long as nobody has proofed differently) yes, this is the only correct horn for the -1. For reference purposes I would recommend picture 36 and 40 of the description D605-27.
You can also check this thread in the forum:
viewtopic.php?t=217&highlight=horn
Regards
Thomas
You can also check this thread in the forum:
viewtopic.php?t=217&highlight=horn
Regards
Thomas
-
- Assistant Mechanic
- Posts: 136
- Joined: Sun May 09, 2010 5:44 am
- Location: Ramsey, Minnesota USA
thomas591 wrote:Hi Darius,
for the -1 you should search for a SECO horn not Hella!
They are very, very, very rare but there is one at e-bay right now:
http://cgi.ebay.de/ws/eBayISAPI.dll?Vie ... K:MEWAX:IT
Regards
Thomas
Well, that Hupe went for 196,00 Euros.
Here is another Hupe for sale. Is this one correct for a NZ 350-1? It looks better than the modern Swiss made Hupe I have now.
http://cgi.ebay.de/WH-Bakelit-Hupe-DKW- ... 4329588183
-
- Mechanic
- Posts: 526
- Joined: Wed Jan 02, 2008 8:33 pm
- Location: Schleswig-Holstein, Germany
Hello,
yes the horns would fit the NZ350-1 and they are pictured in the manual. But the manual is the only evidence for these horns, the one found fitted on a original bike has a three-point mounting plate, compare with the horn-thread.
yes the horns would fit the NZ350-1 and they are pictured in the manual. But the manual is the only evidence for these horns, the one found fitted on a original bike has a three-point mounting plate, compare with the horn-thread.
DKW F 102 1965
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Leszek from the Polish oldtimer-garage sells good copies.
They are new, so You don't have to be afraid to get a not, or not good working 70 year old horn (for much money).
http://www.oldtimergarage.eu/store/adva ... n&x=11&y=8
Martin
They are new, so You don't have to be afraid to get a not, or not good working 70 year old horn (for much money).
http://www.oldtimergarage.eu/store/adva ... n&x=11&y=8
Martin