Parts for DKW NZ 350

Here you can post your want adds for NZ 350, 350-1 parts

Moderator: Mods

Nech
Tool Cleaner
Tool Cleaner
Posts: 62
Joined: Wed Jul 20, 2011 9:54 pm
Location: CZ

Re: Parts for DKW NZ 350

Post by Nech » Tue Aug 16, 2011 8:49 pm

Yes Frank I now know what you mean.
Hmm interesting.

Thank you
martdapp
Master Mechanic
Master Mechanic
Posts: 949
Joined: Sat Jan 19, 2008 9:46 am
Location: Hoensbroek Niederlande

Re:

Post by martdapp » Wed Aug 17, 2011 2:48 pm

What, I see no link or picture ?
Nech
Tool Cleaner
Tool Cleaner
Posts: 62
Joined: Wed Jul 20, 2011 9:54 pm
Location: CZ

Re: Re:

Post by Nech » Wed Aug 17, 2011 2:53 pm

No picture indeed. I was just remembering some pictures of WH NZ 500's I saw about a mont ago somewhere over the internet :-D So I remembered the light protections was there present. I'll try to google them again.
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 404
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: Parts for DKW NZ 350

Post by Frank » Wed Aug 17, 2011 4:29 pm

Hi Guys,

This Forum " NZ Talk ~ NZ 350 images from the Internet" the red NZ 500 on page 1, it has the same type of protection used on Finnish army NZ 500s during the war.


// Frank
Nech
Tool Cleaner
Tool Cleaner
Posts: 62
Joined: Wed Jul 20, 2011 9:54 pm
Location: CZ

Re: Parts for DKW NZ 350

Post by Nech » Wed Aug 17, 2011 6:12 pm

Yes Frank that's it. Thank you.
But this protector is attached different way - straight to the front fork holders.
On my front fork are the holes separate.
It was maybe some similar "field" construction.. who knows. There are many options.

M.
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 404
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: Parts for DKW NZ 350

Post by Frank » Wed Aug 17, 2011 10:01 pm

Hi Martin,

Here is a link where is a picture of a Finnish army NZ500 during war where you also can see this type of guard. http://aijaa.com/v.php?i=005688401382.png



// Frank
Nech
Tool Cleaner
Tool Cleaner
Posts: 62
Joined: Wed Jul 20, 2011 9:54 pm
Location: CZ

Re: Parts for DKW NZ 350

Post by Nech » Wed Aug 17, 2011 10:20 pm

Thank you Frank,

interesting link.
Especially the skull on the front light (upper left picture).

And here is the one I found and saved from Ebay:

http://nozdrolomo.rajce.idnes.cz/Mitzi#nz500.jpg

M.
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 404
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: Parts for DKW NZ 350

Post by Frank » Wed Aug 17, 2011 10:46 pm

Some off topic: The skull and bones were the older insignia used by the Finnish tank brigade during the war (until 1943?) then they changed to an insignia with 3 arrows, the skull and bones can also be seen on the tank on the same picture.

By the way, quite interesting with the front light guard, I have seen them on severe pictures with NZ 500, but never on a NZ 350. :roll:

// Frank
martdapp
Master Mechanic
Master Mechanic
Posts: 949
Joined: Sat Jan 19, 2008 9:46 am
Location: Hoensbroek Niederlande

Re:

Post by martdapp » Wed Aug 17, 2011 11:05 pm

What ? There is no link or picture ?!
TM250
Tool Cleaner
Tool Cleaner
Posts: 56
Joined: Sat Feb 26, 2011 7:25 pm
Location: Norway

Re: Parts for DKW NZ 350

Post by TM250 » Fri Aug 19, 2011 12:28 pm

Regarding the two holes on the front fork, my NZ 350 also have two holes on each side about three inches above the link arm. I have no idea what may have been attached here.
Nech
Tool Cleaner
Tool Cleaner
Posts: 62
Joined: Wed Jul 20, 2011 9:54 pm
Location: CZ

Re:

Post by Nech » Fri Aug 19, 2011 12:36 pm

Image

The same?
TM250
Tool Cleaner
Tool Cleaner
Posts: 56
Joined: Sat Feb 26, 2011 7:25 pm
Location: Norway

Re: Parts for DKW NZ 350

Post by TM250 » Fri Aug 19, 2011 12:52 pm

No. Mine are on a line parallel to the link arm some 60 mm apart about the same level as your lower hole
Regards
glen grima butler
Novize
Posts: 1
Joined: Fri Aug 12, 2016 2:47 pm
Location: Malta

Re: Parts for DKW NZ 350

Post by glen grima butler » Thu Aug 25, 2016 11:36 pm

I think I bought this motor bike last year from England I have the same holes on my Fork
Post Reply