Page 3 of 3
Re: Parts for DKW NZ 350
Posted: Tue Aug 16, 2011 8:49 pm
by Nech
Yes Frank I now know what you mean.
Hmm interesting.
Thank you
Re:
Posted: Wed Aug 17, 2011 2:48 pm
by martdapp
What, I see no link or picture ?
Re: Re:
Posted: Wed Aug 17, 2011 2:53 pm
by Nech
No picture indeed. I was just remembering some pictures of WH NZ 500's I saw about a mont ago somewhere over the internet
So I remembered the light protections was there present. I'll try to google them again.
Re: Parts for DKW NZ 350
Posted: Wed Aug 17, 2011 4:29 pm
by Frank
Hi Guys,
This Forum " NZ Talk ~ NZ 350 images from the Internet" the red NZ 500 on page 1, it has the same type of protection used on Finnish army NZ 500s during the war.
// Frank
Re: Parts for DKW NZ 350
Posted: Wed Aug 17, 2011 6:12 pm
by Nech
Yes Frank that's it. Thank you.
But this protector is attached different way - straight to the front fork holders.
On my front fork are the holes separate.
It was maybe some similar "field" construction.. who knows. There are many options.
M.
Re: Parts for DKW NZ 350
Posted: Wed Aug 17, 2011 10:01 pm
by Frank
Hi Martin,
Here is a link where is a picture of a Finnish army NZ500 during war where you also can see this type of guard.
http://aijaa.com/v.php?i=005688401382.png
// Frank
Re: Parts for DKW NZ 350
Posted: Wed Aug 17, 2011 10:20 pm
by Nech
Thank you Frank,
interesting link.
Especially the skull on the front light (upper left picture).
And here is the one I found and saved from Ebay:
http://nozdrolomo.rajce.idnes.cz/Mitzi#nz500.jpg
M.
Re: Parts for DKW NZ 350
Posted: Wed Aug 17, 2011 10:46 pm
by Frank
Some off topic: The skull and bones were the older insignia used by the Finnish tank brigade during the war (until 1943?) then they changed to an insignia with 3 arrows, the skull and bones can also be seen on the tank on the same picture.
By the way, quite interesting with the front light guard, I have seen them on severe pictures with NZ 500, but never on a NZ 350.
// Frank
Re:
Posted: Wed Aug 17, 2011 11:05 pm
by martdapp
What ? There is no link or picture ?!
Re: Parts for DKW NZ 350
Posted: Fri Aug 19, 2011 12:28 pm
by TM250
Regarding the two holes on the front fork, my NZ 350 also have two holes on each side about three inches above the link arm. I have no idea what may have been attached here.
Re:
Posted: Fri Aug 19, 2011 12:36 pm
by Nech
The same?
Re: Parts for DKW NZ 350
Posted: Fri Aug 19, 2011 12:52 pm
by TM250
No. Mine are on a line parallel to the link arm some 60 mm apart about the same level as your lower hole
Regards
Re: Parts for DKW NZ 350
Posted: Thu Aug 25, 2016 11:36 pm
by glen grima butler
I think I bought this motor bike last year from England I have the same holes on my Fork