NZ tools

This is the place for all posts relating to the NZ tools

Moderator: Mods

Post Reply
svenn
Assistant Mechanic
Assistant Mechanic
Posts: 121
Joined: Sun May 06, 2007 9:23 am
Location: Hakadal, Norway

NZ tools

Post by svenn » Wed Jun 06, 2007 3:15 pm

Thougt I would post a pics of the tools i found in the toolbox on my NZ.

All are marked with DKW rings and part number except for the exhaust spanner.

If anyone has pics of other original tools, markings on them and so on, please post here, I would like to know what to keep an eye out for. :)

Image
User avatar
thomas591
Site Admin
Site Admin
Posts: 493
Joined: Sun Mar 26, 2006 1:55 pm
Location: Norderstedt / Northern Germany
Contact:

Post by thomas591 » Sat Jun 09, 2007 9:35 am

Hi Svenn,

nice tools. I think I should start a collection of pictures of original NZ-tools in the parts-section. Have you compard the partnumbers on the tools with the numbers in the parts-catalogue?

If the numbers match, I would like to ask you to take good quality pictures of each individual tool (best one picture of the front side, one picture of the rear side) and e-mail them to me.

Best regards


Thomas
svenn
Assistant Mechanic
Assistant Mechanic
Posts: 121
Joined: Sun May 06, 2007 9:23 am
Location: Hakadal, Norway

Post by svenn » Sun Jun 10, 2007 9:26 pm

A Tool section would be great!!

You got mail Thomas!

Svenn
Nikola D. Dimitrov
Site Admin
Site Admin
Posts: 115
Joined: Sat Mar 25, 2006 11:40 pm
Location: Bulgaria
Contact:

Post by Nikola D. Dimitrov » Mon Jun 11, 2007 12:24 am

Great, I support the Tool section idea, it will be great! I positively have same as the third from the left, with the rings stamped. I will see if I may add some pictures.
DKW NZ 350 Website & Forum Administrator.
svenn
Assistant Mechanic
Assistant Mechanic
Posts: 121
Joined: Sun May 06, 2007 9:23 am
Location: Hakadal, Norway

Post by svenn » Wed Aug 29, 2007 10:35 pm

Found this at Beltring War and Peace show. No DKW markings..but very simular to the wrench in the manual:

Image

Svenn
Wilhelm_Heidkamp
Mechanic
Mechanic
Posts: 526
Joined: Wed Jan 02, 2008 8:33 pm
Location: Schleswig-Holstein, Germany

Post by Wilhelm_Heidkamp » Thu Jan 03, 2008 1:20 pm

Hello,

the right one on your picture is a tool used by Fire-Departments to open and close fittings of fire-hoses. It surely not belongs to the toolset of a NZ 350. It may be carried with a NZ to operate a firepump or sth. like that.
Last edited by Wilhelm_Heidkamp on Sat Jan 05, 2008 4:58 pm, edited 1 time in total.
DKW F 102 1965
DKW NZ 350-1 1945
DKW KL C100/C1 Funkwuerfel 1943
DKW GG400 Funkwuerfel
svenn
Assistant Mechanic
Assistant Mechanic
Posts: 121
Joined: Sun May 06, 2007 9:23 am
Location: Hakadal, Norway

Post by svenn » Fri Jan 04, 2008 10:24 am

Hi Wilhelm.

I think you are wrong on the tool not belonging to the NZ350. You will find it on "Tafel 31" in the partslist #58. Its for loosening and tightening the exhaust pipe nuts on the block when cleaning the mufflers.

But I agree on that it looks just like the ones for fire hoses, but they are often much larger.

Cheers

Svenn
svenn
Assistant Mechanic
Assistant Mechanic
Posts: 121
Joined: Sun May 06, 2007 9:23 am
Location: Hakadal, Norway

Post by svenn » Sun Jan 06, 2008 11:26 am

:lol: I also stated something wrong...

You will not need the tool of course to clean the mufflers. to do this you only need to dismount the mufflers, not the pipes...but you will need the tool to clean/decarbonize the exhaust channels in the block...

Svenn
User avatar
Arloff_NZ
Tool Cleaner
Tool Cleaner
Posts: 72
Joined: Fri Jan 19, 2007 10:04 am
Location: Eifel Region

Post by Arloff_NZ » Mon Jan 07, 2008 12:21 pm

Hi all !

I also think a "tool section" would be great ... to get it on the way I´ll picture my tool collection soon ... including the problem with the tools shown also in the last post: Wich size is correct ??
Most of the war time tools are manufactured after standardisation rules (DIN) and not longer stamped with the Autounion rings as the peace-production... . So you find many of the items in different sizes.
Maybe the size could be calculated from one of the fork-keys ... but does the parts-list show all tools on one photo or is it just "layouted" ??

Regards,

Jens
svenn
Assistant Mechanic
Assistant Mechanic
Posts: 121
Joined: Sun May 06, 2007 9:23 am
Location: Hakadal, Norway

Post by svenn » Mon Feb 09, 2009 4:20 pm

Thought I would post a picture from Ebay of a NZ wrench.

In the download section some wrenches are illustrated in the article about NZ tools. But no one shaped like this this one with NZ part number only DIN numbers.

Image

Image

It kinda strange that it has the same parts number with ending "-0" when it is totally different shaped than the early style wrenches. It has been my believe that all parts on the NZ that were modified or came in later version had a ending part number with "-1" "-2" and so on.

Heres a picture of my early type wrench- same part number:

Image

Here is also a picture of the last wrench in the early type series..not shown in the article on the download section.

Image


Svenn
RTWOLLE
Mechanic
Mechanic
Posts: 414
Joined: Sun Sep 06, 2009 6:06 pm
Location: Thüringen/Deutschland

Post by RTWOLLE » Tue Apr 05, 2011 9:35 pm

Hi,
wrench here
122926-0 14/17 wrench size
122928-0 17/19 wrench size

NZ 250/350, according to ETL No.58
Greetings
RTWOLLEImage
IFA/DKW RT 125/RT 125n.A.
DKW NZ 350-1/ IZH 350
DKW KLM C 100/C 1/ GG 400/StL 462A
RTWOLLE
Mechanic
Mechanic
Posts: 414
Joined: Sun Sep 06, 2009 6:06 pm
Location: Thüringen/Deutschland

Post by RTWOLLE » Tue May 10, 2011 10:22 pm

Hi,
wrench here
122927-0 22/27 wrench size

NZ 250/350, according to ETL No.58
Greetings
RTWOLLEImage
IFA/DKW RT 125/RT 125n.A.
DKW NZ 350-1/ IZH 350
DKW KLM C 100/C 1/ GG 400/StL 462A
Post Reply