NZ 350 parts on NZ 250?

Yes, I know that this page is NZ350 only, but....

Moderator: Mods

dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

NZ 350 parts on NZ 250?

Post by dr_cotton » Tue Nov 19, 2013 12:07 am

Good evening all NZ lovers.

I have the possibility to obtain a NZ 250 for free. The downside is that it has been destroyed in a fire. No frame parts seem to have been bent by the heat from the fire so my hope is that the temperature was not too high and that the steel structure has not changed.

My question is, how much can be used from a 350 on a 250? I am going to start with the fork, is this the same on the two? I can only find a spring for the 350-modell, is this the same as for the 250? Anyone who knows exactly what parts that i need to replace on a fire-damaged fork?

At the moment I live in Berlin and I see on Ebay that quite a few parts can be bought in Germany.
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Wed Nov 20, 2013 12:06 am

A more straight-forward question: Are the frames and forks of the NZ 250, 350 and 500 the same?

Eine geradlinige Frage: Sind die Rahmen und Gabeln der NZ 250, 350 und 500 die gleiche?
Nasenbär
Assistant Mechanic
Assistant Mechanic
Posts: 150
Joined: Sun Jun 16, 2013 8:35 pm

Re: NZ 350 parts on NZ 250?

Post by Nasenbär » Wed Nov 20, 2013 12:19 am

Hello,
You should get DKW spare part list 58. It is about both, NZ250 and 350, so you can compair. The spring has a different part number, but I think it is only the rate because of the higher weight? The other part numbers are the same, exept the lower levers of the fork, but I think only on early bikes. I think it is no problem to get nearly everything for this bike.
Frames and Forks of NZ250 and 350 are mostly the same, NZ 500 is completely different.
Regards, Matthias
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Thu Nov 21, 2013 10:05 pm

Thank you for the information but I cannot seem to find this list 58, is it downloadable or do I have to buy it somewhere?
Nasenbär
Assistant Mechanic
Assistant Mechanic
Posts: 150
Joined: Sun Jun 16, 2013 8:35 pm

Re: NZ 350 parts on NZ 250?

Post by Nasenbär » Fri Nov 22, 2013 12:04 am

Hello,

When you are member of the motoclub Forum, than you have it for free, on WWW.WK-Verlag you can buy List 58-58a-58b with later changes, Geländesport and military parts.
Just list 58 also on ebay.

Regards, Matthias
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Mon Dec 30, 2013 8:11 pm

WK-Verlag was out of list 58. The motoclub Forum, is that http://210277.homepagemodules.de? Anywhere else I can get list 58?
RTWOLLE
Mechanic
Mechanic
Posts: 414
Joined: Sun Sep 06, 2009 6:06 pm
Location: Thüringen/Deutschland

Re: NZ 350 parts on NZ 250?

Post by RTWOLLE » Mon Dec 30, 2013 11:44 pm

IFA/DKW RT 125/RT 125n.A.
DKW NZ 350-1/ IZH 350
DKW KLM C 100/C 1/ GG 400/StL 462A
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Sun Jan 05, 2014 11:58 pm

Cannot log in to this page Wolfgang... How do I become a member?

By the way, what width is original rims?
Nasenbär
Assistant Mechanic
Assistant Mechanic
Posts: 150
Joined: Sun Jun 16, 2013 8:35 pm

Re: NZ 350 parts on NZ 250?

Post by Nasenbär » Mon Jan 06, 2014 1:20 pm

Open www.greiner-oldtimerteile.de, than Service, Downloadbereich. There you will find the list and you don't have to log in. The rims are 2 1/2x19 (Old Name) 1,85x19 (New Name)

Regards, Matthias
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Mon Jan 06, 2014 4:42 pm

Thank you very very much!
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Thu Mar 06, 2014 8:37 am

Could someone tell me the amount and diameter of the steering head bearing (Lenkkopflager) balls of the NZ?
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 422
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: NZ 350 parts on NZ 250?

Post by Frank » Thu Mar 06, 2014 9:29 pm

Hi,

1/4" and you need 38 pcs of them.

//Frank
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Fri Mar 07, 2014 2:58 pm

Great, thanks!
dr_cotton
Novize
Posts: 12
Joined: Mon Nov 18, 2013 10:22 am

Re: NZ 350 parts on NZ 250?

Post by dr_cotton » Sun Apr 13, 2014 9:19 am

My quest continues... Have managed to get most parts for the front fork.

Another question, what size are the threads for the fuel cock?

Welche Gewinde hat der Benzinzahn?
Frank
SUPPORTER 2016
SUPPORTER 2016
Posts: 422
Joined: Thu Nov 19, 2009 8:23 pm
Location: Finland

Re: NZ 350 parts on NZ 250?

Post by Frank » Sun Apr 13, 2014 8:48 pm

Hi,

The thread is M14x1,5mm

//Frank
Post Reply