Original new old stock wheels and fenders in sand color

Here you can sell your 1939-1945 NZ 350, 350-1 parts

Moderator: Mods

Post Reply
tourdehori
Novize
Posts: 2
Joined: Fri Feb 28, 2014 4:15 pm

Original new old stock wheels and fenders in sand color

Post by tourdehori » Mon Mar 10, 2014 11:19 am

Dear All,

I have to limit my DKW NZ collection unfortunately due to lack os space - I had to move to a smaller garage few month ago. :(
Therefore I have some extremely rare parts for sale that I found several years ago.
I have 2 sets of BRAND NEW front wheels - including wheel, iron brake plate and axle - for '43 and 350-1 models and 2 pcs of also BRAND NEW rear fender that is for SB 350 probably. (I have never seen rear fender like that on NZ's but on SBs only.)
All the 4 components have the original sand color in 95% on it's surface.
Parts have never been used but were stored untouched for more than 60 years. Even no tires were fitted onto the wheels as these parts have been stored as spare parts of Wehrmacht. (parts are new old stock - neu, alte Lagerbestand)
E.g. brand logos can be seen on the nipple heads, gaskets in wheel looks like new, fine smell of old grease is present, original bearings are runnig smoothly. :-)
So the condition is flawless. Certainly some marks of time can be seen on the parts - painting is worn at about 5% but no more - but over 70 years it is obvious I think.. But no damage, crack or significant dents.
So you can fit into your bike if you wish but I think it worth to keep as it is as these parts have never been used and as new crying for a showcase somewhere in a museum or in a collection.
Here is a link for the pictures:
https://plus.google.com/photos/11438867 ... banner=pwa

If you wish I can send additional photos about the wheels & fenders.
Price for wheels are 700Euros/piece and 600Euros/piece for fenders.
I can send the parts for free near to Munich anytime or I can take it to Germany easily as I travel to Germany on timely basis.

Best Regards,
Gábor
tourdehori76@gmail.com
Motorboy13
Tool Cleaner
Tool Cleaner
Posts: 92
Joined: Fri Feb 15, 2013 11:24 pm
Location: The Netherlands

Re: Original new old stock wheels and fenders in sand color

Post by Motorboy13 » Tue Mar 18, 2014 8:33 pm

tourdehori wrote:l,l.com
Very nice Parts!!!!still after all the years great to see!!!

Do you have other parts for sale too?? i need parts for my 1939 NZ350.

Like to here from you

greatings

Raimond
tourdehori
Novize
Posts: 2
Joined: Fri Feb 28, 2014 4:15 pm

Re: Original new old stock wheels and fenders in sand color

Post by tourdehori » Tue Mar 18, 2014 10:34 pm

Hello Raimond,

Many thanks for your reply.
My enthusiasm for vintage bikes is limited to DKW NZ fan as I have this type of motorbikes only but all the available 350 version. :D
I have 350 alu version from '41 having "deep" fenders, a 350/'43 from the beginning of manufacturing and a late '44 350-1 with iron casting engine. I started to collect components for my NZs since 1996 from different countries as from Germany thorugh Italy, Austria, Czeh Republic, Poland, Russia and certainly from Hungary. So I have lots and lots of components now.
Let me know please what part you need for your '39 and - however I cannot promise anything - I will have a look and see what can I help you.
Even I have dozens of friends here who have NZs and potentially some spare parts for sale.

Best Regards,
Gábor
Motorboy13
Tool Cleaner
Tool Cleaner
Posts: 92
Joined: Fri Feb 15, 2013 11:24 pm
Location: The Netherlands

Re: Original new old stock wheels and fenders in sand color

Post by Motorboy13 » Sat Mar 22, 2014 12:28 am

Hello Gaber , thanks for your awnser so far. =D> =D>

Yes !!! i still need a lot of Parts ,most Parts are the same that everyone is looking for.

Here i have an short list.:
Hasag nz165 Scheinwerfer- Parts of it /Housing only is ok !!
Hasag Bottom ignition switch or an Hella top ingnitionplate (i have the switch)
1 fully complete Ebersbacher (LH) muffler (i have the RH ) or 2 Exhaust muffler Leistritz
1 or 2 NZ350 Exhaust Nuts for mounting on Cylinder.
1 NZ350 rear brakedrum must be in good shape (mine is original but not round anymore)
the lower NZ Chainbox (the smal part)
NZ 350 Bolts/Nuts M8x1 & M10x1
I also may consider buying an 1939 type NZ350 Front fender and the 39 Rear fender-smal part.

I am stil busy with restoring &dismantel of my 39 NZ 350, i espect to need more parts in near future too!! (i did not find the time to make an total list jet)

i also have some more parts that i could sell or trade (have to make an list of that too)

Please let me know what you do have for sale. (ore trade)

like to here from you :) :)

Raimond
dkwkri
Novize
Posts: 17
Joined: Thu Jan 26, 2012 10:33 am

Re: Original new old stock wheels and fenders in sand color

Post by dkwkri » Sun Mar 23, 2014 2:48 pm

Hello
Do you have front fender to dkw nz 350/43,zyclone filter or rear lampe?
Dirk
Tool Cleaner
Tool Cleaner
Posts: 81
Joined: Sun Oct 19, 2008 6:22 pm
Location: Deventer, The Netherlands

Re: Original new old stock wheels and fenders in sand color

Post by Dirk » Mon Apr 07, 2014 10:33 am

Raimond,

If you are looking for m8 or m 10 nuts, Oldtimergarage.szn.pl sells them.

Dirk
Post Reply