NZ350-1943 in French auction
Moderator: Mods
-
- Tool Cleaner
- Posts: 55
- Joined: Sat Apr 08, 2006 2:04 pm
- Location: Ashford, Kent, UK
-
- Site Admin
- Posts: 115
- Joined: Sat Mar 25, 2006 11:40 pm
- Location: Bulgaria
- Contact:
I bit on it too but it stop at 4000 Euro + cost = 4800 very much money for it. I bought lot 175 a DKW NZ 350 frame only with engine, frame no: 619115 I have not yet located the engine number. All the german parts/lots on the auction where sold sky hi. The Kettenkrad sold for 50.000 euro + kost = 60.000 Euro. The Schwimmwagen for 68.000 + 20% = 81.600 Euro. All the vehicle's need restoration.
Cees
Cees
BMW R75, Zundapp KS 750, VW 166, Hanomag 20B, HD WLC, Ford GP, Ford GPA, Dodge WC57.
Hi Cees !
Do you have some more pictures of this NZ ?? On the one side I agree that over 5.000 Eu ist a bit to much for an unrestored NZ, but on the other hand this machine is one of a little number of NZ which survived in original condition. Except for the do-it-your-self tollbox and the registration number (and the carburator??) its absolute original, even the paint istn`t to bad.
Did you look for its frame number ? Would be also interesting as it is an early Modell 1943.
Regards,
Jens
Do you have some more pictures of this NZ ?? On the one side I agree that over 5.000 Eu ist a bit to much for an unrestored NZ, but on the other hand this machine is one of a little number of NZ which survived in original condition. Except for the do-it-your-self tollbox and the registration number (and the carburator??) its absolute original, even the paint istn`t to bad.
Did you look for its frame number ? Would be also interesting as it is an early Modell 1943.
Regards,
Jens
Jens
We didn't take any pictures from the NZ. I agree this was a very nice NZ in original condition but our limit was 4000 Eu for it. We forgot to take the frame number. This guy was a scrap dealer he kept all the german material apart for years and years.
Cees
We didn't take any pictures from the NZ. I agree this was a very nice NZ in original condition but our limit was 4000 Eu for it. We forgot to take the frame number. This guy was a scrap dealer he kept all the german material apart for years and years.
Cees
BMW R75, Zundapp KS 750, VW 166, Hanomag 20B, HD WLC, Ford GP, Ford GPA, Dodge WC57.