My DKW now has a new owner
Moderator: Mods
My DKW now has a new owner
Its with a heavy heart that I part with my DKW NZ 350-1 but I decided to sell it to purchase a MP40 here in the US (MP40's are expensive here due to the registration system having closed down in 1984). Anyhow the new owner will be receiving his bike here before the end of January and I will be informing him to stop by and register here to get info/parts/etc. I have had an amazing time owning my DKW over the last 2 years and I really hope that in the future I can pick up another one. These are truely robust and beautiful motorcycles and I'd pick a DKW over a BMW or Zundapp any day of the week. Thanks again for everyones help here and I wish you the best with the new year! Happy Holidays!
-Tim in VA
-Tim in VA
Tim Neumann
- thomas591
- Site Admin
- Posts: 493
- Joined: Sun Mar 26, 2006 1:55 pm
- Location: Norderstedt / Northern Germany
- Contact:
...in case you do not want to make it yourself, than check here:
http://www.oldtimergarage.eu/store/prod ... cts_id=476
Welcome to the forum
Thomas
http://www.oldtimergarage.eu/store/prod ... cts_id=476
Welcome to the forum
Thomas
-
- Assistant Mechanic
- Posts: 136
- Joined: Sun May 09, 2010 5:44 am
- Location: Ramsey, Minnesota USA
I would be willing to swap, but you should know the condition in which I found this light first. A section of the light was broken and missing and was repaired with red epoxy and painted as shown in the pictures. Also, the original clear lens was yellowed, opaque, and broken and was rpelaced with modern plastic. I need a complete light assembly that is correct for the NZ 350-1. I could trade you the light housing and internals, minus the light bulb which I need to keep. Unfortunately I had to cut a small section of the license plate to accomodate the witch's nose and would have to fix that somehow.
The witch's nose light is held on with two bolts. Would I have to change the holes in the fender to accomodate the NZ 350-1 light?
The witch's nose light is held on with two bolts. Would I have to change the holes in the fender to accomodate the NZ 350-1 light?
Hi,
Can you take me a photo of the base plate and a photo showing the inside of the rearlight? As can be seen if it is original or a reproduction.
And I have to look if I have a complete rearlight for NZ.
Regards
RTWOLLE
Can you take me a photo of the base plate and a photo showing the inside of the rearlight? As can be seen if it is original or a reproduction.
And I have to look if I have a complete rearlight for NZ.
Regards
RTWOLLE
IFA/DKW RT 125/RT 125n.A.
DKW NZ 350-1/ IZH 350
DKW KLM C 100/C 1/ GG 400/StL 462A
DKW NZ 350-1/ IZH 350
DKW KLM C 100/C 1/ GG 400/StL 462A