I was a bit dissapointed to see all those not correct frameplates during my search for a First type + Additional Military type plate from 1940. Most vendors sell frameplates for the first type, for the 250, for the 500 etc. ALL WITH 'WH-AUSFUHRUNG' this is total wrong, such plates never existed! Only the later frameplates from the NZ 350-1 had the extra-script 'WH-Ausf'. Fortunatly I managed to find a vendor who has knowledge about these information, he sells all the correct plates for all NZ-types. He sells also plates for all other DKW-motorcycles and many other motorcycle's as BMW, NSU, Zundapp etc. etc.
Contact; piterawo@op.pl
Martin
Correct frameplates
Moderator: Mods
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Correct frameplates
You do not have the required permissions to view the files attached to this post.
Re: Correct frameplates
Now we need someone to make 350 NZ-1 plates in steel...
Paul
1945 DKW NZ 350-1
1945 DKW NZ 350-1
-
- Master Mechanic
- Posts: 950
- Joined: Sat Jan 19, 2008 9:46 am
- Location: Hoensbroek Niederlande
Re: Correct frameplates
Hello Paul, I allready contacted this vendor for steel -1 plates,
till now I had no answer. Otherwise I start a search for other vendors.
Happy holydays,
Martin
till now I had no answer. Otherwise I start a search for other vendors.
Happy holydays,
Martin